Vince’s Upholstery – Reupholster

By Frank Parker

We had previously reupholstered a Parker-Knoll 60’s wing back chair for a client who then requested us to reupholster two 2 ½ seater settees purchased in the early 80’s made by Vince’s Upholstery.

Vince’s Upholstery was founded by Vince and Pina Scalisi who originally started the business from their home in East Perth making budget priced furniture. They progressed over time and became renowned for manufacturing top end custom-made lounge furniture from a purpose built factory in Morley.

Our clients presented us with two identical looking 2 ½ seater settees however when we removed the fabric it became obvious they were purchased at different times as one settee featured a traditional sprung edge and the other a fabricated foam edge with different springs. The challenge was to reupholster the two settees so they both felt identical for comfort.

We re-webbed the seats and fitted new coil springs of the same height and gauge then fabricated a foam edge on one settee to replicate the sprung edge of the other. We also replaced all existing hessian and body padding however the down and feather cushion inners were still in good condition so we encased these in 200g boned polyester fibre. The settees were reupholstered to the original finish in a cotton velvet then delivered to very happy clients!

Similar Posts

  • Leather Furniture Repair

    leather furniture repair perth

    This leather is an exceptionally high quality semi-aniline leather used to upholster a beautiful contemporary settee. The client thought that the scarring was excessive and considered them as leather imperfections. With this type of rustic look natural leather defects are acceptable and indeed considered a feature. However scarring where the surface is broken can be seen as a type of leather damage and should be confined to inconspicuous areas of the upholstery.

    This was a case in which the client complained with possible good reason. The manufacture should have been more prudent with the leather cutting process and the furniture retailer should have better explained the natural features of rustic semi-aniline leather to the client. Fortunately this settee was made in Australia and both the manufacturer and retailer acted quickly  to rectify the problem resulting in a happy ending!

    Call us Today to Have Your Timeless Furniture Restored
  • Jardan Reupholster

    Jardan owned by brothers Nick & Michael Garnham commenced operations in 1987 from humble beginnings having eight staff by 1997 with over one hundred and seventy employed today.  All furniture is custom-made in a modern equipped factory located in Melbourne with retail outlets now in Brisbane, Sydney, Melbourne and Perth.

    A client approached us saying they had purchased a Jardan 3 seater settee when their children were just toddlers now their children are young adults and the settee has served them well but was in desperate need re-upholstery. Our clients were true patriots as they also selected an Australian made fabric for the re-upholstery.

    We removed all existing upholstery from the timber frame and the only casualty from almost two decades of heavy use was one broken spring which shows the value of purchasing high quality Australian made furniture. We laminated new high density foam to the frame body and fabricated polyester filled channelled and quilted back cushion inserts and polyester encased premium foam seat cushion inserts. The settee was then re-upholstered with the outside arms and back lined and padded with piped detail.

    Our clients were glad they had made the correct decision in having their settee re-upholstered in a quality Australian made fabric, it should be good for another two decades and the grandchildren.

    Call us Today
  • Re-upholstery of a Jason Recliner Chair

    reupholster Jason recliner Perth

    Transforming the Classic Jason Recliner

    Jason recliner chairs are an iconic piece of Australian furniture valued for their quality craftsmanship and durability, making them sought after to this day. This restoration aimed to preserve the chair’s structure for future generations to come.

    The Origin of Jason Recliners

    Jason chairs were manufactured under license from Lazy Boy in Munro Michigan. The factory operated in Welshpool WA from the mid 1960s through to about 1990. These chairs were known for featuring a very robust and unique mechanism. The business was owned and managed by the Bridge family with the chairs distributed around Australia and at its peak they were also exported.

    This is Our Restoration Process

    • The chair was completely stripped and the mechanism cleaned and lubricated
    • The show-wood rocker base and the turned wing sections were sanded and re-lacquered dark walnut
    • The back zig zag springs were linked
    • New hessian was layered over the seat springs
    • New high density padding was laminated onto the body
    • New polyester encased premium cushioning was fabricated and
    • The chair was then re-upholstered to the same finish in an English Heritage Linen
    This chair was also of sentimental value as it previously belonged to our client’s father. We wish her many years of memorable moments in this special chair.
    Call us Today to Find Out About Restoring Your Chair

  • Reupholstery of Late 19th to Mid 20th Century Classic Australian Furniture

    mid century chair upholstery

    This classic mid century three seater couch was manufactured in 1948 by Hicks Furniture in Kalgoorlie Western Australia. Some classic furniture was made in major WA regional centres from the late-19th century through to the mid-20th century. This was due to the problems associated with long distance transport of bulky fragile items and the fact that many skilled trades people from all walks of life migrated to these areas during the preceding gold rushes. However the other important factor is that the demand existed during this time frame for quality upholstered furniture.

    This midcentury couch was purchased by its current owner who is now 93 years of age when he was married at the age of 24, as a present for his wife. It is interesting to note that it was re-upholstered in the 1970’s. The original sprung edge was replaced with timber rails. The initial upholstery fabric was a tapestry and it was re-upholstered in an olive velvet. Unfortunately the furniture repair of this piece wasn’t detailed. It was limited to only replacing a sprung edge with timber and placing the new fabric over the old sandwiched with a layer of foam.

    We stripped the existing upholstery back to the frame then carefully knocked the joints apart, glued then clamped and screwed the frame where necessary. Our client wanted to retain the history of this mid century sofa so we simply cleaned up the show-wood timber. We also touched up the chips with an oak stain and then used a quality furniture polish to bring back the shine. The frame was then webbed and re-sprung mainly using traditional upholstery methods with an art-deco upholstery fabric. The result is that a classic Australian made couch has been given a new lease of life for future generations to enjoy.

    Call us Today to Have Your Mid Century Furniture Beautifully Restored
  • Re-upholster Torrance & McKenna furniture

    Torrance & McKenna upholstery perth

    The History of Torrance & McKenna

    Torrance & McKenna was founded by Andy Torrance and Allen McKenna commencing manufacturing high quality lounge furniture in 1939. Their business however was interrupted during the war years with both joining the armed forces. They recommenced operations from their factory in East Perth in 1945. Torrance & McKenna flourished for three decades during the boom years for local furniture manufacturers supplying the up-market Perth retailers with high quality custom-made lounge furniture.

    The business was sold in 1975 to Gerry and Kath Edwards with their son John later taking over operations. Gerry had an intimate knowledge of the industry being the state manager for Wilson Fabrics, the distributer of Sanderson Linen. In 1979 Torrance & McKenna started selling direct into the market which was a good strategic move to maintain a reputation for quality as discount furniture was starting to dominate the local retail scene.

    In 2002 Torrance & McKenna was purchased by Yogesh and Dina Shah. Yogesh having a degree in furniture design maintained the quality for which the business was renowned also introduced a re-upholstery service then shifted to a larger premises in Osborne Park. The business was subsequently purchased by an interior designer Deborah DeFiddes in 2018.

    Our Clients Situation

    Our clients approached us by saying they loved their Torrance & McKenna lounge furniture which they had purchased in 1989 but it has just worn out due to heavy use over a thirty year period. They wanted to flash back thirty years with an identical suite.

    Our clients were in luck as their suite was upholstered in a Sanderson Linen and this particular design was still available. We stripped back the existing upholstery to the frames, re-webbed the furniture then laminated high density padding to the body work and fabricated new polyester encased premium cushioning. The lounge suite was then re-upholstered to the original finish and our clients were absolutely delighted.

    Call us Today to Have Your Lounge Suite Reupholstered

  • Ercol Furniture – upholster

    Ercol Furniture was established in 1920 by Lucian Ercolani in High Wycombe, Buckinghamshire manufacturing timber framed lounge furniture and occasional furniture. In 1944 Ercol was awarded a contract by the Government Board of Trade to produce 100 000 low cost spindled/bentwood framed chairs. This involved a process the company developed of steam pressing English Elm so the chairs could be assembled from pre-formed components.

    In 2002 Ercol moved into a purpose built factory at Princes Risborough, Buckinghamshire. The company has gone on to produce many award winning ranges of furniture. Like many western countries, the UK has in more recent years also had a reversion back to purchasing from local manufacturers.

    A client from the Peel region approached us requiring a quote to have her Ercol lounge suite re-furbished. The furniture was originally purchased by her parents in the UK prior to her birth in Australia. There had been some rather amateur attempts to both polish and re-upholster this suite which has the effect of adding to the work involved.

    We removed all the upholstery and stripped back the lacquer to bare timber. The frame was then stained a mid-tone walnut and coated with three coats of 30% gloss lacquer. Quality seat webbing was then fitted and then we fabricated premium foam cushioning laminating it with bonded polyester fibre. We disregarded the old cushion covers and made new patterns bringing everything back to original with a blue tone fabric featuring a wide abstract diamond pattern being selected by our client.

    When delivering the furniture the look on our client’s face said it all, she simply said “Amazing!” This just reinforces our factory philosophy ‘work hard and enjoy the journey’.

    Call us Today