Leather Furniture Repair

By Frank Parker

leather furniture repair perth
leather furniture repair perth

This leather is an exceptionally high quality semi-aniline leather used to upholster a beautiful contemporary settee. The client thought that the scarring was excessive and considered them as leather imperfections. With this type of rustic look natural leather defects are acceptable and indeed considered a feature. However scarring where the surface is broken can be seen as a type of leather damage and should be confined to inconspicuous areas of the upholstery.

This was a case in which the client complained with possible good reason. The manufacture should have been more prudent with the leather cutting process and the furniture retailer should have better explained the natural features of rustic semi-aniline leather to the client. Fortunately this settee was made in Australia and both the manufacturer and retailer acted quickly  to rectify the problem resulting in a happy ending!

Call us Today to Have Your Timeless Furniture Restored

Similar Posts

  • Re-upholster antique chaise lounge

    ByFrank Parker

    When given a restored antique chaise lounge frame to re-upholster the problem is that there may have been many different ways it was traditionally upholstered. Therefore the method of upholstery depends upon the client’s interpretation on how the furniture appeared originally combined with the restorer’s knowledge and research into period pertaining to this style of furniture.   

    This antique chaise lounge frame was given to us by a client who wanted it upholstered for her bedroom. Apparently this piece originated from the 1880’s and she did not want any deep buttoning in the upholstery. We went through much archival material on chaise lounges from this period and found examples of similar double ended pieces from this period with plain upholstery which coincided with our client’s expectations. Above all our client also wanted the re-upholstered chaise to be comfortable giving us considerable autonomy regarding upholstery methods.

    We set about our task and first cleaned and repaired the original castors. We then webbed the base with heavy weight jute webbing, laced in the coil springs, tied them down then fitted a hessian overlay. We then used synthetic furniture edging and built the seat, back and scroll ends up with varying hardness’s of high density cushioning encased with bonded polyester fibre. The result of building up the platforms this way is that the traditional look is maintained however unlike the furniture from this era comfort has not been sacrificed for style. The upholstery was trimmed with matching gimp trim creating a superb finish.

    Our client was elated with the stylish finish of her re-upholstered antique chaise lounge but was equally impressed with the comfort which would not have been such a necessity in the bygone days. We trust our client will enjoy and relax on her rejuvenated chaise lounge for many years.

    Call us Today

  • Restoration of Antique Chairs

    ByFrank Parker

    Genuine fine antique chairs become scarcer as time ticks on due to fatigue with function and unnecessary destruction. Poor and inappropriate furniture repairs due to operators not possessing the necessary skills also increase the scarcity. It is important to always use a reputable and skilled restorer.

    Our client approached us with a dining chair from the 1880’s which was bequeathed to her by her maternal grandmother as one was for each granddaughter. After receiving the chair she had it repaired and re-upholstered however within a short time with only gentle use the lower back carved section again broke away. The chair remained in her lounge room as a decorative piece for several decades but constantly annoyed her until we were presented with the repair and re-upholstery task.

    The lumbar carved section had broken away for two reasons; only an average quality PVA glue had been used for the repair and where the timber had fractured there was burl grain so it was originally flawed. We chipped away the remaining burl timber then stage by stage rebuilt the carved section in question using two-pack epoxy resin. Each section was masked-up and filled with resin then sanded into shape. After this was completed the re-built section was stained to match the remaining timber work.

    The existing upholstery was then completely removed with new jute webbing being fitted, coil springs then laced in and tied down and a hessian overlay fitted. A synthetic thumb roll was then fitted to the seat edges and filled in with high density premium padding then a bonded polyester overlay. The chair was then upholstered in a black cut pile cotton velvet and finished with twin piping. This method reduces the cost for our client but also creates a usable and durable seat however not authentic of the period.

    Our client was elated with the finished result especially because the chair would once again become a functional piece of furniture.

    Call us Today

  • Re-upholster Antique Chairs

    ByFrank Parker

    Occasionally we receive antique chairs which are basically well preserved but they have been previously shabbily re-upholstered or upholstered out of context with the era. This rarely does the furniture justice and usually results in complete restoration.

    Our client came to us with a lounge chair made in the 1890’s having been originally purchased by her deceased husband’s grandparents. She was honest in explaining that under her instructions the chair had been re-upholstered in the early 1980’s in a pastel cotton and the style modernised to match their décor at a previous residence. She was now ashamed of her previous decision and wanted the chair re-upholstered to its previous glory.

    The chair’s design had been modernised by having a loose seat cushion fitted and absence of piped detail. We removed all the upholstery stripping the chair down to the bare frame and the turned timber legs were then cleaned and polished. Heavy weight jute webbing was then fitted to the seat and back, the coil springs laced, tied down then hessian overlays fitted. We used synthetic ‘thumb roll’ on the seat front, arms and back scrolls then laminated premium polyurethane foams finished with polyester overlays. The seat cushion inner was fabricated from high resilience foam and encased with bonded polyester fibre.

    The chair was then upholstered using a fabric selected by our client which suited the chair and was basically in keeping with the period. The result was a chair which was modernised to a degree under the cover for comfort however retained much authenticity with the upholstery finish and piped detail. Our client was over joyed with her chair and no doubt will become a family heirloom.

    Call us Today

  • 1960’s American Sofa-Bed

    ByFrank Parker
    Sofa Bed Reupholstery Perth

    1960’s American Sofa Bed Restoration

    It started with a home consultation for our client

    A couple contacted us saying that they had just retired and had shifted into an inner city town house in Perth and they were wondering whether to rejuvenate or dispose of their sofa-bed. We immediately organised a home consultation to see the condition of their sofa-bed.

    This is the sofa-bed’s history

    Upon inspection of this sofa-bed it became apparent that it was made in the U.S in 1968. The frame was constructed from solid American Oak. The sofa-bed action was manufactured by Windsor of Canada who are renowned for their high quality mechanical componentry which tended to be over engineered and will subsequently last the decades. The result was with such a robust frame and action the sofa-bed was to be re-upholstered.

    The restoration process

     We removed the sofa-bed action and stripped the existing upholstery to the frame. The upholstery fabric selected by our client was similar to the original cover so it was guaranteed suitable. The cushion inserts were down and feather so we encased these in a bonded polyester fibre and replaced all the body padding with high density foam. We basically used the same upholstery techniques but tidied up the finish including doing the skirt in three sections to match the back cushions.

    Happy clients of Parker Interiors

    The final result is fine and yet functional sofa-bed superbly rejuvenated for our clients to enjoy for many years into the future.

    Call us Today for Sofa-Bed Reupholstery

  • Reupholster Art Deco Chairs

    ByFrank Parker

    From our understanding these chairs were made in Czechoslovakia in the late 1920’s, manufacturer unknown. For their time the construction techniques used are quite advanced utilising a ‘push-in seat’ and back flutes located with spring-edge wire. However the most significant thing about these chairs is the general proportion and balance of the design.

    A client contacted us saying that she had acquired two art deco European chairs requiring restoration. Upon initial inspection we found the chairs had been shabbily re-upholstered and covered in decades of grime. As we stripped away the fabric on these chairs it exposed some of the original upholstery providing enough information for an authentic reconstruction.

    The first step was several construction repairs to the timber frames then removing the layers of grime. The show-wood components of the frames were then gently sanded back, stained a mid-tone Oak then three coats of clear lacquer. Then with the upholstery we re-constructed the sprung edge seats and backs by lacing in the springs, fabricated the spring edge wire and tying down the springs. We then sewed on the hessian overlays and ring-clipped on polyurethane edge moulding. The seats and backs were then layered with premium foam and polyester overlays. The client’s fabric selection suited the chairs and was practical to upholster. The panels were cut being carefully pattern matched then largely pre-sewn but requiring some hand stitching.

    The re-furbishing of these chairs combined traditional methods with modern materials however did not compromise the design integrity. Our client was overjoyed with the result and the chairs now take pride of place in her lounge room.

    Call us Today

  • Jardan Reupholster

    ByFrank Parker

    Jardan owned by brothers Nick & Michael Garnham commenced operations in 1987 from humble beginnings having eight staff by 1997 with over one hundred and seventy employed today.  All furniture is custom-made in a modern equipped factory located in Melbourne with retail outlets now in Brisbane, Sydney, Melbourne and Perth.

    A client approached us saying they had purchased a Jardan 3 seater settee when their children were just toddlers now their children are young adults and the settee has served them well but was in desperate need re-upholstery. Our clients were true patriots as they also selected an Australian made fabric for the re-upholstery.

    We removed all existing upholstery from the timber frame and the only casualty from almost two decades of heavy use was one broken spring which shows the value of purchasing high quality Australian made furniture. We laminated new high density foam to the frame body and fabricated polyester filled channelled and quilted back cushion inserts and polyester encased premium foam seat cushion inserts. The settee was then re-upholstered with the outside arms and back lined and padded with piped detail.

    Our clients were glad they had made the correct decision in having their settee re-upholstered in a quality Australian made fabric, it should be good for another two decades and the grandchildren.

    Call us Today