Cornwell Norton chairs – Reupholster

By Frank Parker

Cornwell Furniture was formed in the 1960’s, a division of Parker Knoll Furniture in the United Kingdom. Cornwell was a signature range of Parker-Knoll specialising in high quality mass production motion chairs.

The chair pictured is branded “Cornwell-Norton Ltd” which signifies it was manufactured in the Cornwell factory located at Chipping Norton in West Oxfordshire which commenced operations in the mid 60’s and closed in 2003.

Our clients having migrated from the UK in the 1970’s had by now only a few remnant pieces of furniture from the homeland but their pride piece was this Cornwell Norton motion chair which they wanted rejuvenated..

We completely removed all the upholstery from the frame which was well constructed from Beech and plywood. The mechanical action was a simple push mechanism however it remained in good working condition which is a tribute to the designers of the day. The frame required no attention and was re-webbed using heavy grade elastic webbing then padded utilising high density polyurethane foam. The cushion inserts were fabricated from premium foam and encased with bonded polyester fibre and the outside arms and outside back were lined then padded.

The fabric selected by our clients was an English striped chenille which was period for the furniture and also suited the particular design. The chair was then upholstered to its original condition trimmed with piping and the cushions completed with buttoning.

Our clients were elated with their chair rejuvenated to back to its stylish sixties finish and no doubt it bought back many wonderful memories of the era.

Similar Posts

  • Boans Furniture – reupholster

    The Boan brothers opened their first department store at Wellington Street Perth in 1895 then moved into selling furniture in 1912. After the First World War demand for furniture was strong so Boans commenced manufacturing furniture from a factory located corner Saunders and Glide Streets Perth. The range of furniture made was extensive from cabinetry to upholstered furniture, mattresses and cane furniture.

    With the anti -Asian sentiment dominate during this period the Factories Act of 1904 forced Asian furniture manufacturing companies to stamp on their products “Asiatic Labour” and so Boans like many other local furniture manufacturers of time took advantage of this situation advertising that their furniture was made with “European Labour Only”.

    During the late 1960’s Boans started retailing furniture from other specialist manufactures and also started importing furniture. Boans remained dominate and indeed an iconic retailing business in WA for almost a century and was sold to Myer in 1986.

    We were approached by a mother and daughter who had fond memories of their lounge furniture purchased from Boans in the early 1960’s which was made under licence to Parker Knoll in the UK. The lounge suite had served the family well for almost 60 years however it was certainly due for re-upholstery.

    They selected a Warwick linen to replace the original Sanderson linen so the furniture would retain an elegant appearance in their sitting room. We completely removed all existing upholstery then rectified a few minor structural issues with the timber frames. The tension springs were replaced and the bodywork padding was replaced with high density polyurethane foam and the cushions were fabricated from premium foam and encased with bonded polyester. The linen was pattern matched, cut and sewn then upholstered to its original splendour.

    Call us Today
  • Sofas to Size – Reupholster

    Sofas to Size evolved from Impact Designs, a company founded in 1996. The business manufactured wholesale upholstered furniture and was located at Buckingham Drive Wangara. Then in 2005 the business name was changed to Sofas to Size and marketed direct to the public from a retail premises located on Canning Highway in South Perth.

    The concept of marketing sofas custom-made to size was an excellent concept as the business grew rapidly in a short time. Sofas to Size ceased operating in 2010.

    We were contacted by a client who purchased several settees made by Sofas to Size. These settees were identical in design and custom-made to specific lengths to suit our clients living area. They were originally upholstered in a synthetic suede but they were to be re-upholstered in a quality plain chenille.

    The existing upholstery was completely removed from the timber framed settees then new heavy grade elastic webbing was fitted and then new body-work padding was laminated onto the frames. New polyester encased premium seat cushion inserts were fabricated along with polyester filled channelled and quilted back cushion inserts. The settees were then carefully upholstered to the original finish.

    Our clients was absolutely delighted with the result of their refurbished settees saying they were designed for the room and they still looked perfect for the room.

    Call us Today
  • Re-upholster Antique Chairs

    Occasionally we receive antique chairs which are basically well preserved but they have been previously shabbily re-upholstered or upholstered out of context with the era. This rarely does the furniture justice and usually results in complete restoration.

    Our client came to us with a lounge chair made in the 1890’s having been originally purchased by her deceased husband’s grandparents. She was honest in explaining that under her instructions the chair had been re-upholstered in the early 1980’s in a pastel cotton and the style modernised to match their décor at a previous residence. She was now ashamed of her previous decision and wanted the chair re-upholstered to its previous glory.

    The chair’s design had been modernised by having a loose seat cushion fitted and absence of piped detail. We removed all the upholstery stripping the chair down to the bare frame and the turned timber legs were then cleaned and polished. Heavy weight jute webbing was then fitted to the seat and back, the coil springs laced, tied down then hessian overlays fitted. We used synthetic ‘thumb roll’ on the seat front, arms and back scrolls then laminated premium polyurethane foams finished with polyester overlays. The seat cushion inner was fabricated from high resilience foam and encased with bonded polyester fibre.

    The chair was then upholstered using a fabric selected by our client which suited the chair and was basically in keeping with the period. The result was a chair which was modernised to a degree under the cover for comfort however retained much authenticity with the upholstery finish and piped detail. Our client was over joyed with her chair and no doubt will become a family heirloom.

    Call us Today
  • Reupholster Merry Widow

    Little information has been passed down through the industry or indeed written about the history or origin of ‘Merry Widow’ settees or lounge furniture. We can only assume it is historically linked to the Austro-Hungarian opera the ‘Merry Widow’ which had its debut in 1906 and was marathon performing during the period. This would co-inside with the start of the art-deco period which a merry widow could feel indulged on such an opulent sofa. 

    A merry widow settee and two chairs were brought to us by a farming family from the south-west. The furniture belonged to her grandparents and she believed was made in the 1930’s and had already been re-upholstered twice and modified. Our job was to bring it back to its glorious by-gone past, a very labour intensive task.

    We removed the layers of fabric stripping the suite down to the bare timber frame. The turned legs were discarded which were an addition during an 80’s revamp then the frame joints knocked apart and glued with a two pack resin then screwed. The rear legs, front blocks and timber trays were sanded then stained as the Jarrah had bleached and finished with three coats of lacquer.

    The re-upholstery commenced with fitting jute webbing and lacing coil springs into the seat, back and arms, then fabricated the sprung edge, and tied down the springs then applied hessian overlays. We then fitted synthetic edging to the sprung edge, top inside back and arms and laminated premium foam layers overlayed with bonded polyester fibre. The upholstery fabric selected suited the period being a very high quality black abstract floral velvet which looked extremely sumptuous. The outside arms and backs were also lined and padded and finished with piped trim.

    Our clients were breath taken with the result as they had seen the previous re-upholstery when teenagers but this was far superior in every detail and designed to last for another lifetime.

    Call us Today
  • Leather Furniture Repair

    leather furniture repair perth

    This leather is an exceptionally high quality semi-aniline leather used to upholster a beautiful contemporary settee. The client thought that the scarring was excessive and considered them as leather imperfections. With this type of rustic look natural leather defects are acceptable and indeed considered a feature. However scarring where the surface is broken can be seen as a type of leather damage and should be confined to inconspicuous areas of the upholstery.

    This was a case in which the client complained with possible good reason. The manufacture should have been more prudent with the leather cutting process and the furniture retailer should have better explained the natural features of rustic semi-aniline leather to the client. Fortunately this settee was made in Australia and both the manufacturer and retailer acted quickly  to rectify the problem resulting in a happy ending!

    Call us Today to Have Your Timeless Furniture Restored
  • Re-furbish Australian styled ‘Club Lounge’

    Perth Reupholstery Club Lounge

    The Classical Club Lounge

    What we generally recognise as Australian styled ‘club lounges’ were made from the late 1920’s through to the mid 1950’s. This design was not uniquely Australian however it was very popular during this era and the suite featured is typical of this period however many variations were available.

     These suites all featured the wide arms with timber trays and bases but some also decorative timber trim on the arm facings. The upholstery finishes were also available in a wide variation of finishes. This included cord trim, contrast piping and raised panel patterns on the backs.

    Our Client’s Request

    We were requested to completely re-furbish this ‘club lounge’ by a client who inherited this furniture from her parents but which originally belonged to her grandparents. This lounge suite was made in the late 1940’s and then re-upholstered in the 1970’s so it was in a dilapidated condition when received for refurbishment.

    The Reupholstery Process

    • We completely stripped the existing upholstery to the frame
    • The frame was well constructed using thick Jarrah timber
    • We screwed all the joints to eliminate any potential movement
    • We sanded back the timber arm trays and base blocks
    • Then polished the Jarrah leaving a natural finish
    • The suite was then re-upholstered using the traditional jute webbing, coil springs and hessian for the seat and back bodywork
    • For comfort and practicability we then use premium cushioning for the base, back and arm overlays also polyester encased premium seat cushion inserts.

    Combining the traditional and modern upholstery techniques gives an authentic finish but provides practical and comfortable seating.

    In rejuvenating this classic Australian styled ‘club lounge’ our clients will be able to cherish their family memories into the future.

    See more of our high quality reupholstered furniture here.

    Call us Today to Have Your Club Lounge Professionally Reupholstered