Tub Chair Reupholstery

By Frank Parker

tub chairs perth
tub chairs perth

These tub chairs were purchased three years ago from a leading WA furniture retailer. The clients paid a high price for these chairs which were sold to them as superior quality Italian made pieces of furniture. The manufacturing labels fixed under the chairs reveal they were made in China.

The covering which is a very poor quality laminated fabric has delaminated in areas of wear. The frames can only be described as having been ‘slapped together’ by unskilled labour. The poor quality elastic seat webbing was breaking down and the low density foam collapsing.

As part of the tub chair reupholstery process, a new seat frame was constructed from a single piece of structural grade plywood, laced with heavy duty elastic seat webbing then laminated with high density premium grade cushioning. The furniture recovering of these chairs was finished with a quality Australian made fabric.

The end result was that the client spent about 70% of the initial purchase price to have their tub chair upholstery problems rectified. This makes a mockery of the old saying “the high purchase price is long forgotten but the bitterness of poor quality remains” as these clients were stung with a high purchase price and left with the bitter taste of poor quality. I guess the moral of the story is “buyer beware” so do your research prior to purchase and maybe look a bit closer to home!

Similar Posts

  • Restoration of Antique Chairs

    Genuine fine antique chairs become scarcer as time ticks on due to fatigue with function and unnecessary destruction. Poor and inappropriate furniture repairs due to operators not possessing the necessary skills also increase the scarcity. It is important to always use a reputable and skilled restorer.

    Our client approached us with a dining chair from the 1880’s which was bequeathed to her by her maternal grandmother as one was for each granddaughter. After receiving the chair she had it repaired and re-upholstered however within a short time with only gentle use the lower back carved section again broke away. The chair remained in her lounge room as a decorative piece for several decades but constantly annoyed her until we were presented with the repair and re-upholstery task.

    The lumbar carved section had broken away for two reasons; only an average quality PVA glue had been used for the repair and where the timber had fractured there was burl grain so it was originally flawed. We chipped away the remaining burl timber then stage by stage rebuilt the carved section in question using two-pack epoxy resin. Each section was masked-up and filled with resin then sanded into shape. After this was completed the re-built section was stained to match the remaining timber work.

    The existing upholstery was then completely removed with new jute webbing being fitted, coil springs then laced in and tied down and a hessian overlay fitted. A synthetic thumb roll was then fitted to the seat edges and filled in with high density premium padding then a bonded polyester overlay. The chair was then upholstered in a black cut pile cotton velvet and finished with twin piping. This method reduces the cost for our client but also creates a usable and durable seat however not authentic of the period.

    Our client was elated with the finished result especially because the chair would once again become a functional piece of furniture.

    Call us Today
  • Our Refurbishing of T.H Brown chairs

    TH Brown Chairs Reupholstered Perth

    The History of Thomas Howard Brown

    Thomas Howard Brown formed T.H Brown during 1911 in Adelaide. The brand became a household name in furniture during the first half of the 20th century being one of Australia’s largest furniture manufacturers by the 1920’s and producing its two millionth chair by the 1940’s.

    Thomas’s son Peter joined the business after his return from WWII and went on to develop some of T.H. Brown’s most iconic pieces of furniture. Peter and his brother Napier ran the business until 1987 when T.H. Brown was sold to Work Space Commercial Furniture.

    Thomas’s grandson Simon joined the business in 2015 and formed a joint operation to re-launch some of T.H. Brown’s mid-century signature pieces.

    Our Client’s TH Brown Chairs

    Our client has a classic mid-century home and wished to furnish it appropriately. She had acquired a substantial range of pre-loved furniture from this era over several years and we were fortunate in been given the task of restoring these pieces.

    The Reupholstery Process We Undertook

    One of our tasks was to restore a set of six T.H. Brown dining chairs.

    • We carefully stripped these chairs down
    • Due to the quality of construction few repairs were required
    • The chairs were then carefully sanded back
    • Three coats of clear lacquer were applied being sanded back between coats
    • The frames were then gently rubbed back with super fine steel wool to enhance the matt finish required
    • We then laminated the seat ply panel with high density premium padding and
    • Upholstered the seat with a classic mid-century textured velvet.

    This beautiful mid-century furniture was completely rejuvenated to its bygone glory days and our client is now living out her dream.

    Call us Today to Have Your Dining Chairs Reupholstered
  • Leather Furniture Repair

    leather furniture repair perth

    This leather is an exceptionally high quality semi-aniline leather used to upholster a beautiful contemporary settee. The client thought that the scarring was excessive and considered them as leather imperfections. With this type of rustic look natural leather defects are acceptable and indeed considered a feature. However scarring where the surface is broken can be seen as a type of leather damage and should be confined to inconspicuous areas of the upholstery.

    This was a case in which the client complained with possible good reason. The manufacture should have been more prudent with the leather cutting process and the furniture retailer should have better explained the natural features of rustic semi-aniline leather to the client. Fortunately this settee was made in Australia and both the manufacturer and retailer acted quickly  to rectify the problem resulting in a happy ending!

    Call us Today to Have Your Timeless Furniture Restored
  • Why do modern sprung cushions have problems?

    cushion upholstery Perth

    What are contemporary sprung cushions?

    Contemporary sprung cushions have been marketed over the last decade as a superior concept however there are major issues regarding the effectiveness of using ‘spring pockets’ in the fabrication of seat cushion inserts.

    How are traditional spring cushions different to modern spring cushions?

    Traditional sprung cushions were constructed using mid-gauge coil springs and hand sewn into a hessian case then encased with flock and fitted into a box piped seat cushion with sewing usually finished by hand stitching. Seat cushions constructed this way tend to stand the test of time as is evident by cushions still used in antique furniture.

    However the fabrication of modern sprung cushion inserts utilise light-gauge coil springs encased in a series of thin polyester pockets which are normally referred to as ‘spring pockets’. These spring pockets are placed in the centre of the cushion inserts and sandwiched with polyurethane foam then usually encased with polyester fibre. With moderate to heavy use the spring pockets tend to distort with the springs often fracturing the casings. The result is a distorted and uncomfortable seat cushion and maybe a costly repair bill outside the warranty period.

    What about the option of premium quality foam cushions?

    The sales personnel promoting the “advantages” of sprung cushions usually infer by definition that the base is also sprung but most sprung cushions are on bases fitted with elastic webbing. The truth is that there is nothing wrong with a settee base correctly fitted with high quality elastic webbing. However a superior cushion insert can be effectively achieved by simply using premium quality polyurethane foam encased in polyester fibre and no spring pockets!

    Call Us To Help You With the Cushions on Your Furniture
  • Le Cornu Furniture – reupholster

    Le Cornu was an iconic South Australian furniture manufacturing and retailing business. Operations commenced in 1861 when Phillip Le Cornu started a wholesale cabinet making business in Adelaide. In 1885 the factory was largely destroyed by fire and recommenced operations at a former church in North Adelaide. In 1921 the founder died and his son Phillip took over the business expanding operations and by 1924 employed 25 people.

    In 1954 the business went factory direct with a diversified range of furniture and over the next two decades expanded retail stores in S.A and Darwin. In 1989 the North Adelaide store was closed and then the business was sold to Fantastic Holdings in 2008.

    Our client approached us wanting to re-upholster a settee purchased by his parents from Le Cornu in 1959. This settee was the surviving piece of the lounge suite which he grew up with and lounged upon as a teenager. It was still upholstered in the original fabric being a ribbed velvet which would have been the latest trend at the time of purchase.

    We removed all the existing upholstery from the settee frame and it was well constructed with little structural work required. The frame was re-sprung with heavier gauge no-sag springs on the seat and the back springs were replaced with the same gauge. The springs were linked, outside arms and back were lined with hessian and high density body work padding applied. The original cushion inserts were latex and these were replaced with polyester encased premium cushions. The two seater settee was then upholstered to its original finish in a ribbed Zepel gold velvet.

    Our client was gobsmacked upon delivery of the settee saying it was just as he remembered it as a child growing up in Adelaide.

    Call us Today
  • Re-upholster leather Tessa furniture

    Tessa Furniture is an iconic name in Australian furniture manufacturing being a prolific name during the heydays of local furniture industry. Although refurbished mid-century modernist furniture with a Scandinavian influence is a niche market the interest not only resides with those who have been fortunate to have witnessed this period of design history. Some discerning members of younger generations are purchasing or inheriting this furniture and having it restored.  

    A client approached us with her much loved Tessa leather lounge suite which she had inherited from her parents. She wanted the lounge fully restored as she remembered it growing up on the family farm.

    We completely removed all existing upholstery then sanded the frame back to bare timber. Several timber rails were re-glued then the frame was finely sanded. The Tasmanian Myrtle timber frame was then stained back to the original finish and given three coats of lacquer being lightly sanded between coats.

    The original springing systems were fine in the backs and the settee seat however new premium quality elastic webbing was fitted to the chair seats to conform to the original specifications. New channelled and quilted polyester back cushion inners were fabricated likewise new polyester encased premium polyurethane seat cushion inners. The quality of the seat and back cushion inners however far exceeded the original upholstery componentry.

    It is extremely important to use a high quality leather for the upholstery and we used the Tasman ‘Matisse Manuka’ which is a superior quality semi-aniline leather from New Zealand. All the detailed stitching was replicated and needless to say that our client was elated at the family lounge suite being returned to its former glory days.

    Call us Today