Reupholster Argyle Furniture

By Frank Parker

Argyle Furniture Designs was founded by Frank Parker in 1982 and was a trading name of F.R Parker Furniture which commenced operations in Perth during the mid-1970s. Prior to this F.R. Parker & Co. commenced in 1964 operating as manufacturers’ agents in WA representing both WA and Eastern States furniture manufacturers.

Argyle Furniture Designs manufactured a range of mainly Australian colonial styled furniture. The signature of their designs were solid well-constructed Jarrah frames featuring the Pullmaflex springing system.  Argyle Furniture Designs was sold to Karl Bloomfield of Living Choice Upholstery in 2006.

A client contacted us having purchased an Argyle Furniture Designs lounge suite in 1989. It had received constant use over the years in their lounge room and they wanted the furniture re-upholstered. It had been originally upholstered in a high quality synthetic suede.

We completely removed all existing upholstery and cleaned the Jarrah show-wood legs. The Pullmaflex springing system remained in excellent condition and the cushioning although originally high quality required replacing. The body padding was replaced and we fabricated new polyester encased premium seat and back cushion inserts.

The lounge suite was upholstered in an Australian made plain chenille and upholstered to original condition. Our clients were elated with the finished result and we trust they have many years of enjoyment  using their re-upholstered lounge suite.

Call us Today

Similar Posts

  • Laminated Polyurethane Fabrics

    ByFrank Parker
    fix faux leather peeling

    If this was your chair, you may be be thinking where can I get my chair reupholstered? Would you believe that this chair is only two years old and looks like it has been in a war zone. It is well constructed however unfortunately it was covered in a polyurethane fabric which has been affected by hydrolysis. This is when body oils and perspiration leach between the top polyurethane film and the backing fabric resulting in delamination.

    This has been a continual problem for many decades with laminated polyurethane fabrics. The manufacturer, import wholesaler and retailer could only be labelled as blissfully ignorant if they were unaware of this issue.

    We recommended to our client to reupholster this chair in the most durable upholstery fabric. For this we chose a commercial grade synthetic suede which will last for many years. It cost the client approximately 60% of the initial purchase price. This highlights the necessity for retail staff to be adequately trained and the necessary enforcement of consumer law. In this case as with so many, the client was left holding the baby while the supply chain were left holding the profits.

    We can help you with your well worn chair to ensure that you get the best wearing upholstery fabric. So that you are enjoying your furniture for many years to come.

    We Can Help You Restore Your Furniture – Just Call us Today!

  • Refurbish Lincoln Furniture

    ByFrank Parker

    The Background to Lincoln Furniture Nedlands W.A.

    Richard Laurence the founder of Lincoln Furniture worked in the upholstered furniture industry in California USA and immigrated with his family to Perth Western Australia in the late 1960’s. He initially worked with Perth furniture retailers for several years to gain an understanding of the local industry then commenced Lincoln Furniture.

    Reupholstering a Lincoln Lounge Suite

    This Lincoln lounge suite consisting of 2 x 2 ½ seater settees and 2 x chairs was purchased in 1978 from the Perth furniture store – Lincoln Furniture. Lincoln Furniture was established in Perth in the early 1970’s and the company operated until the early 1990’s. This Nedlands based furniture manufacturer used to produce high quality traditional American style furniture. Parker Furniture had the privledge to beautifully reupholstered this lounge furniture to restore it for its appreciative Western Australian owners. The lounge was originally constructed with a unique sprung edge utilising no sag springs which was an American system and had previously not used by Australian lounge furniture manufacturers.

     

    Call us To Have Your Old Lounge Suite Reupholstered

  • Reupholster Merry Widow

    ByFrank Parker

    Little information has been passed down through the industry or indeed written about the history or origin of ‘Merry Widow’ settees or lounge furniture. We can only assume it is historically linked to the Austro-Hungarian opera the ‘Merry Widow’ which had its debut in 1906 and was marathon performing during the period. This would co-inside with the start of the art-deco period which a merry widow could feel indulged on such an opulent sofa. 

    A merry widow settee and two chairs were brought to us by a farming family from the south-west. The furniture belonged to her grandparents and she believed was made in the 1930’s and had already been re-upholstered twice and modified. Our job was to bring it back to its glorious by-gone past, a very labour intensive task.

    We removed the layers of fabric stripping the suite down to the bare timber frame. The turned legs were discarded which were an addition during an 80’s revamp then the frame joints knocked apart and glued with a two pack resin then screwed. The rear legs, front blocks and timber trays were sanded then stained as the Jarrah had bleached and finished with three coats of lacquer.

    The re-upholstery commenced with fitting jute webbing and lacing coil springs into the seat, back and arms, then fabricated the sprung edge, and tied down the springs then applied hessian overlays. We then fitted synthetic edging to the sprung edge, top inside back and arms and laminated premium foam layers overlayed with bonded polyester fibre. The upholstery fabric selected suited the period being a very high quality black abstract floral velvet which looked extremely sumptuous. The outside arms and backs were also lined and padded and finished with piped trim.

    Our clients were breath taken with the result as they had seen the previous re-upholstery when teenagers but this was far superior in every detail and designed to last for another lifetime.

    Call us Today

  • Re-furbish Library chairs

    ByFrank Parker
    Upholstered library chairs

    The History of These Upholstered Library Chairs (William IV Chairs)

    A set of two leather look library chairs were presented to us by a gentleman who wanted them rejuvenated. These chairs were purchased new in the 1920’s by his grandfather in England. “Library” chairs also referred to as “William IV” chairs were initially constructed in the 1830’s thus this design of chair had already been in circulation for almost a century.  

    Library Chair Details

    These chairs were constructed from English Oak and traditionally upholstered in a tapestry fabric. They had then been re-upholstered in the 1970’s using a Nylex vinyl named “Deerhide”. Deerhide was a product of its day and although extremely popular, perhaps these chairs deserved to be covered in something slightly more elegant.

    How We Beautifully Restored These William IV Chairs

    We stripped these well worn chairs completely back then cleaned and polished the elegant carved timber frames. We used the original upholstery methods. This included jute webbing, coil springs and stitched edges and indulged in a final thin layer of premium foam. The upholstery was also finished to the original standard with space studded self-covered banding.

    This resulted in this pair of two library chairs being brought back to their former glory and a very happy owner.

    Call us Today To Have Your Precious Furniture Restored

  • Oliver’s Upholstery

    ByFrank Parker

    Oliver’s Upholstery was founded by Andrew Oliver in the late 1980’s being situated in Perth Western Australia. The business manufactured economically priced upholstered furniture for the WA retail sector. The business grew quickly becoming one of the larger upholstery manufacturers by volume in the State. However about a decade of operation cheap inferior products started coming into Australia from Malaysia and Thailand then flooding in from China.

    With the value area of the local market being displaced with imported furniture Andrew Oliver changed directions renaming the business Oliver’s Re-upholstery focusing on re-upholstery and commercial upholstery.

    Long term clients approached us when renovating their home wanting to have two wing back chairs re-upholstered. These clients resided in a leafy Perth suburb and thought the chairs were rather special but it’s difficult to explain to such clients that their taste in furniture maybe a bit ordinary, especially if they want the chairs re-upholstered in a high quality leather.

    The upholstery was rather tacky so we stripped the chairs back to the bare frames and were rather surprised that the frames were soundly constructed. We sprung the frames, laminated the body work with high density foam padding slightly redesigning the upholstery. The leather was a full-aniline leather from Tasman Tanning and was a pleasure to use as the chairs took shape. Using more traditional labour intensive upholstery techniques paid off as displayed by the finished product.

    Our clients were simply “gob-smacked” with their re-upholstered wing back chairs which just goes to show that you can make a silk purse from a sow’s ear!

    Call us Today

  • Sofas to Size – Reupholster

    ByFrank Parker

    Sofas to Size evolved from Impact Designs, a company founded in 1996. The business manufactured wholesale upholstered furniture and was located at Buckingham Drive Wangara. Then in 2005 the business name was changed to Sofas to Size and marketed direct to the public from a retail premises located on Canning Highway in South Perth.

    The concept of marketing sofas custom-made to size was an excellent concept as the business grew rapidly in a short time. Sofas to Size ceased operating in 2010.

    We were contacted by a client who purchased several settees made by Sofas to Size. These settees were identical in design and custom-made to specific lengths to suit our clients living area. They were originally upholstered in a synthetic suede but they were to be re-upholstered in a quality plain chenille.

    The existing upholstery was completely removed from the timber framed settees then new heavy grade elastic webbing was fitted and then new body-work padding was laminated onto the frames. New polyester encased premium seat cushion inserts were fabricated along with polyester filled channelled and quilted back cushion inserts. The settees were then carefully upholstered to the original finish.

    Our clients was absolutely delighted with the result of their refurbished settees saying they were designed for the room and they still looked perfect for the room.

    Call us Today