Reupholster Merry Widow

By Frank Parker

Little information has been passed down through the industry or indeed written about the history or origin of ‘Merry Widow’ settees or lounge furniture. We can only assume it is historically linked to the Austro-Hungarian opera the ‘Merry Widow’ which had its debut in 1906 and was marathon performing during the period. This would co-inside with the start of the art-deco period which a merry widow could feel indulged on such an opulent sofa. 

A merry widow settee and two chairs were brought to us by a farming family from the south-west. The furniture belonged to her grandparents and she believed was made in the 1930’s and had already been re-upholstered twice and modified. Our job was to bring it back to its glorious by-gone past, a very labour intensive task.

We removed the layers of fabric stripping the suite down to the bare timber frame. The turned legs were discarded which were an addition during an 80’s revamp then the frame joints knocked apart and glued with a two pack resin then screwed. The rear legs, front blocks and timber trays were sanded then stained as the Jarrah had bleached and finished with three coats of lacquer.

The re-upholstery commenced with fitting jute webbing and lacing coil springs into the seat, back and arms, then fabricated the sprung edge, and tied down the springs then applied hessian overlays. We then fitted synthetic edging to the sprung edge, top inside back and arms and laminated premium foam layers overlayed with bonded polyester fibre. The upholstery fabric selected suited the period being a very high quality black abstract floral velvet which looked extremely sumptuous. The outside arms and backs were also lined and padded and finished with piped trim.

Our clients were breath taken with the result as they had seen the previous re-upholstery when teenagers but this was far superior in every detail and designed to last for another lifetime.

Similar Posts

  • Refurbish Parker Knoll chairs

    Parker Knoll Chairs Perth Restored

    The Origination of Parker Knoll

    New seat and back heavy grade elastic webbing was fitted then high-density foam was laminated to the arms and frame bodies including the outside arm and back panels which were lined and padded. Polyester filled channelled and quilted back cushion inserts were fabricated. The premium foam polyester encased seat cushion inserts were fabricated by laminating two grades of foam creating a cushion that progressively firms and ensuring greater longevity.

    The new venture was quickly successful producing high quality sprung furniture for the mass market. During the war years the company produced wooden componentry for de Havilland and repaired gliders then reversed into furniture production after 1945. With increasing the company listed in 1950 and then in the 1960’s saw vast production of recliner chairs which became a signature item.

    The company went back to private ownership in 2004 after suffering financial difficulties then went through several ownerships and now has gone back to its roots producing high quality furniture from a state of the art factory in Nottinghamshire.

    How We Restored the Parker Knoll Chairs

    A set of two Parker Knoll chairs were completely stripped of the upholstery and sanded back to the bare timber.  Three coats of lacquer were applied being sanded between coats. The frames were then lightly rubbed back with super-fine steel wool to produce the required finish.

    The client selected a 1970’s period velvet for the upholstery. The padding was fabricated by laminating premium cushioning then encased in polyester fibre. The upholstery fabric suited these chairs embracing the era.

    Our Client’s Feedback

    Our client was overwhelmed with the chairs adding these pieces to her home filled with beautiful mid-century furniture.

    Call us Today to Have Your Furniture Reupholstered
  • 1960’s American Sofa-Bed

    Sofa Bed Reupholstery Perth

    1960’s American Sofa Bed Restoration

    It started with a home consultation for our client

    This is the sofa-bed’s history

    Upon inspection of this sofa-bed it became apparent that it was made in the U.S in 1968. The frame was constructed from solid American Oak. The sofa-bed action was manufactured by Windsor of Canada who are renowned for their high quality mechanical componentry which tended to be over engineered and will subsequently last the decades. The result was with such a robust frame and action the sofa-bed was to be re-upholstered.

    The restoration process

     We removed the sofa-bed action and stripped the existing upholstery to the frame. The upholstery fabric selected by our client was similar to the original cover so it was guaranteed suitable. The cushion inserts were down and feather so we encased these in a bonded polyester fibre and replaced all the body padding with high density foam. We basically used the same upholstery techniques but tidied up the finish including doing the skirt in three sections to match the back cushions.

    Happy clients of Parker Interiors

    The final result is fine and yet functional sofa-bed superbly rejuvenated for our clients to enjoy for many years into the future.

    Call us Today for Sofa-Bed Reupholstery

  • Reupholster Chesterfield Settees

    The Chesterfield sofa was developed by skilled furniture artisans in the mid 1700’s for Lord Philip Stanhope, the third Earl of Chesterfield. The Earl was known as a trendsetter and commissioned local artisans to produce an upholstered piece of furniture to which gentlemen could sit on without creasing their suits.

    Chesterfields would become the most renowned sofa design in history defined by the scroll arms, low back, deep buttoning and studded trim. They were usually upholstered in dark traditionally toned leathers. However over time this design has been modernised and is often now upholstered in velvets.

    A couple approached us with two 2 ½ seater Chesterfield settees purchased in the mid 1980’s being made by Moran of Melbourne. These settees were over forty years old and attracted constant use but had stood the test of time well which was a display of their quality.

    We removed the existing upholstery then started the re-upholstery process by fitting new jute webbing and fitting new spring units. The foundation of the inside arms/backs were fine so we just laminated and thin foam layer with a polyester overlay and new seat cushion inserts fabricated from premium foam then encased in bonded polyester fibre. The upholstery fabric selected was again a quality plain velvet which is suitable for this design sofa while also being very durable and serviceable.

    The result spoke for itself and we often find clients select fabrics similar to their original selection because of favourable performance and design suitability. This was no exception and our clients seemed overjoyed with the result.

    Call us Today
  • Restoration of Antique Chairs

    Genuine fine antique chairs become scarcer as time ticks on due to fatigue with function and unnecessary destruction. Poor and inappropriate furniture repairs due to operators not possessing the necessary skills also increase the scarcity. It is important to always use a reputable and skilled restorer.

    Our client approached us with a dining chair from the 1880’s which was bequeathed to her by her maternal grandmother as one was for each granddaughter. After receiving the chair she had it repaired and re-upholstered however within a short time with only gentle use the lower back carved section again broke away. The chair remained in her lounge room as a decorative piece for several decades but constantly annoyed her until we were presented with the repair and re-upholstery task.

    The lumbar carved section had broken away for two reasons; only an average quality PVA glue had been used for the repair and where the timber had fractured there was burl grain so it was originally flawed. We chipped away the remaining burl timber then stage by stage rebuilt the carved section in question using two-pack epoxy resin. Each section was masked-up and filled with resin then sanded into shape. After this was completed the re-built section was stained to match the remaining timber work.

    The existing upholstery was then completely removed with new jute webbing being fitted, coil springs then laced in and tied down and a hessian overlay fitted. A synthetic thumb roll was then fitted to the seat edges and filled in with high density premium padding then a bonded polyester overlay. The chair was then upholstered in a black cut pile cotton velvet and finished with twin piping. This method reduces the cost for our client but also creates a usable and durable seat however not authentic of the period.

    Our client was elated with the finished result especially because the chair would once again become a functional piece of furniture.

    Call us Today
  • Leather Furniture Repair

    leather furniture repair perth

    This leather is an exceptionally high quality semi-aniline leather used to upholster a beautiful contemporary settee. The client thought that the scarring was excessive and considered them as leather imperfections. With this type of rustic look natural leather defects are acceptable and indeed considered a feature. However scarring where the surface is broken can be seen as a type of leather damage and should be confined to inconspicuous areas of the upholstery.

    This was a case in which the client complained with possible good reason. The manufacture should have been more prudent with the leather cutting process and the furniture retailer should have better explained the natural features of rustic semi-aniline leather to the client. Fortunately this settee was made in Australia and both the manufacturer and retailer acted quickly  to rectify the problem resulting in a happy ending!

    Call us Today to Have Your Timeless Furniture Restored
  • Reupholstery of Late 19th to Mid 20th Century Classic Australian Furniture

    mid century chair upholstery

    This classic mid century three seater couch was manufactured in 1948 by Hicks Furniture in Kalgoorlie Western Australia. Some classic furniture was made in major WA regional centres from the late-19th century through to the mid-20th century. This was due to the problems associated with long distance transport of bulky fragile items and the fact that many skilled trades people from all walks of life migrated to these areas during the preceding gold rushes. However the other important factor is that the demand existed during this time frame for quality upholstered furniture.

    This midcentury couch was purchased by its current owner who is now 93 years of age when he was married at the age of 24, as a present for his wife. It is interesting to note that it was re-upholstered in the 1970’s. The original sprung edge was replaced with timber rails. The initial upholstery fabric was a tapestry and it was re-upholstered in an olive velvet. Unfortunately the furniture repair of this piece wasn’t detailed. It was limited to only replacing a sprung edge with timber and placing the new fabric over the old sandwiched with a layer of foam.

    We stripped the existing upholstery back to the frame then carefully knocked the joints apart, glued then clamped and screwed the frame where necessary. Our client wanted to retain the history of this mid century sofa so we simply cleaned up the show-wood timber. We also touched up the chips with an oak stain and then used a quality furniture polish to bring back the shine. The frame was then webbed and re-sprung mainly using traditional upholstery methods with an art-deco upholstery fabric. The result is that a classic Australian made couch has been given a new lease of life for future generations to enjoy.

    Call us Today to Have Your Mid Century Furniture Beautifully Restored