Restoring Fler Chairs

By Frank Parker

Fred Lowen and Earnest Rodeck met on a refugee ship escaping Nazi Europe bound for Port Melbourne. Fred Lowen started work in 1942 as a fitter and turner but woodturning was his passion. The two commenced their business in 1946 under the acronym FLER starting in an old stable.

The business grew quickly as they engaged with Myer Emporium supplying modern designs with turned legs and Scandinavian influence. By the mid-late 1960’s Fler had manufacturing operations is several states. The massive demand for this style of furniture in Australia was created by the post-war residential boom in modern housing.

A couple were referred onto us as they had two Fler SC55 chairs produced in the late 1950’s and two E31 chairs from the 1960’s requiring complete restoration. They originally were purchased new by her parents but unfortunately were very poorly ‘restored’ by a supposedly reputable business in the 1980’s. Given this we had to completely strip the chairs back to the raw timber frames with the intention of restoring them to their original splendour.

With the frames completely sanded back the timber was stained Mahogany then three coats of clear lacquer. The cushion inserts were originally latex rubber however premium polyurethane foam encased with bonded polyester fibre is more durable and provides superior comfort. We re-upholstered the chairs in a velvet using the original finishing methods resulting in glowing fine lines.

Our clients were astounded with the result taking her back remembering the chairs in bygone years. This work also provides great pleasure for us as furniture manufacturers and restorers.

Similar Posts

  • Upholstery Up-cycling

    Over the decades we have found considerable change in consumer sentiment towards reducing waste and up-cycling furniture. This tends to mainly occur with furniture that is built to last but the design has become out dated over time. Unfortunately lower quality furniture after several years of use ends up on verge collections, unnecessarily depleting resources and contributing to the landfill problem.  

    A client approached us with a Moran sofa-bed she had purchased many years ago as a student as she required both a sofa and some were to sleep. This was well constructed and the bed action was very good condition warranting re-upholstery.

    We completely removed the existing upholstery and laminated new high density foam padding to the frame body. Then fabricated new polyester filled channelled and quilted back cushion inserts and new polyester encased premium foam seat cushion inserts. The upholstery finish was modified deleting the skirts and replacing them with piped borders. The result was a smart contemporary sofa-bed which will function for another few decades.

    We were also approached by a senior citizens home with quality furniture however it had become outdated over time and was also looking slightly tired. We suggested the settees could be re-styled with some cosmetic changes to the upholstery.

    The settees were stripped to the frames then new heavy grade elastic webbing fitted and high density foam laminated to the body work. New channelled and quilted polyester filled back cushion inserts were fabricated and polyester encased premium foam seat cushions were also constructed. The main change in the upholstery was the deletion of skirts which was replaced in the front by a padded piped border with the outside arms and backs also then lined and padded providing a plush finish. The previous fabric was a striped satin weave and was replaced with a fresh looking abstract floral in a flat weave. The clients were elated with the result!

    Call us Today
  • Custom Upholstery

    This custom-made dining lounge was designed and manufactured by a cabinet making firm then upholstered by a local upholstery business. The frame was well designed and constructed however there were continual substantial issues with the upholstery. Unfortunately this is something that occurs to often in our industry. 

    A client approached us saying she had a custom-made dining lounge and there were substantial issues with the upholstery and she had given up trying to negotiate any solution with this upholstery business. The entire front edge of the seat had collapsed and buttons which she did not want but were initiated by the upholstery firm had ‘popped’. Our client engaged us to completely re-upholster this dining lounge.

    We completely removed the existing upholstery and discovered the problems causing the clients concerns. The previous upholsterers had used high quality foam on the seat however they had used a water based contact adhesive to which there are still major application problems and is was simply just not effective. Also the reason they had to place buttons into the seat and back panels was that the patterns were not true to the frame sizes causing the cushions to distort.

    We started from scratch making templates true to the frame then fabricated premium cushioning and laminated it with bonded polyester fibre. The cushion covers were then carefully marked with sewing indicators and sewn to shape as such large panels can either be stretched or gathered. The lounge was then upholstered with minimal effort as the fabric covers fitted perfectly.

    The result was that our client was absolutely overwhelmed with the result and we have since received repeat work from her. This just goes to show that quality work is always the best form of advertising and everyone is a winner.

    Call us Today
  • Modern Antique Chairs

    It is becoming more common to re-upholster antique furniture using bright modern fabrics. At first this may seem sacrilege to connoisseurs of fine furniture but if quality antique furniture is being saved no one can complain.    

    A client approached us saying she had found a pair of identical ‘Grandfather’ antique chairs beside the railway line in York W.A. At first we just assumed these were nothing but discarded antique reproduction chairs however upon inspection our client was correct, they were indeed genuine antique chairs from the mid to late 19th century.

    We completely removed the existing upholstery and carried out some structural repairs then touched up the polish work. We then used traditional methods to re-upholster these chairs only compromising by using premium foam seat and inside arm/back overlays. A modern teal velvet with black velvet piping was used to cover the chairs and trimmed with black gimp.

    Well what could we say, the clients were elated and the chairs looked stunning! The chairs were saved and our clients can enjoy their rejuvenated furniture for many years.

    Call us Today
  • Re-upholster antique chair in linen

    The use of different upholstery materials can totally transform the appearance of a chair. You may have inherited a chair or just have seen an antique chair where you admire the design but have to use your imagination regarding a suitable fabric for re-upholstery which would suit your décor.  In this situation take your time to investigate the possibilities and possibly consult with an upholsterer experienced in this area of work.   

    A client came to see us from the South West farming town of Boyup Brook as they had inherited chair from the United Kingdom made in the 1880’s. This chair had sadly resided in their shed for many years and was in a dilapidated state having been previously in leather. They wanted this chair to be re-furbished for their bedroom so a Heritage Linen with a matching soft pink cotton velvet for piping.

    The existing upholstery was completely stripped to the frame then structural repairs carried out and the legs re-polished. We then fitted jute webbing, laced and tied down coil springs with hessian overlays. The shapes were then developed utilising modern polyurethane furniture edging instead of fibre fill stitched edges and premium high density foam instead of the traditional flock and fibre. We feel that using this combination of traditional and modern methods of building the upholstery foundation gives an authentic finish with superior comfort.

    The chair was then upholstered a high quality screen printed vat dyed linen with a matching pink cotton velvet piping. This gave a softer appearance to the chair which was required by our client. This chair having been constructed in the 1880’s was now rejuvenated by descendants of the original owners and functional in 2019!

    Call us Today
  • Problems with re-upholstering your old lounge suite

    Fixing up a previous reupholstery job

    This modular unit was manufactured by a local Perth, business ‘Farmer Furniture’ in the early 1980’s. It was re-upholstered 12 years ago however the clients had never been happy with the quality of the reupholstery job as it simply “did not feel like the old suite when new”.

    How we approached renewing this lounge suite

    We stripped the old upholstery from the modular frame. It revealed that the second layer of fabric had simply been placed over the initial fabric in which the suite was made. This style of reupholstery is very problematic. The issue is caused by the webbing, body padding and cushioning not being replaced resulting in this lounge furniture quickly returning to a dysfunctional state. Which is a waste of time and money for the owners.

    The next stage involved us:

    This process allowed us to modernise the upholstery finish without losing the authentic character of the lounge suite.

    The final result was a well finished and functional modular lounge this family will enjoy for many years into the future.

    Call us so we can help you reupholster your lounge suite
  • Re-furbish Australian styled ‘Club Lounge’

    Perth Reupholstery Club Lounge

    The Classical Club Lounge

    What we generally recognise as Australian styled ‘club lounges’ were made from the late 1920’s through to the mid 1950’s. This design was not uniquely Australian however it was very popular during this era and the suite featured is typical of this period however many variations were available.

     These suites all featured the wide arms with timber trays and bases but some also decorative timber trim on the arm facings. The upholstery finishes were also available in a wide variation of finishes. This included cord trim, contrast piping and raised panel patterns on the backs.

    Our Client’s Request

    We were requested to completely re-furbish this ‘club lounge’ by a client who inherited this furniture from her parents but which originally belonged to her grandparents. This lounge suite was made in the late 1940’s and then re-upholstered in the 1970’s so it was in a dilapidated condition when received for refurbishment.

    The Reupholstery Process

    • We completely stripped the existing upholstery to the frame
    • The frame was well constructed using thick Jarrah timber
    • We screwed all the joints to eliminate any potential movement
    • We sanded back the timber arm trays and base blocks
    • Then polished the Jarrah leaving a natural finish
    • The suite was then re-upholstered using the traditional jute webbing, coil springs and hessian for the seat and back bodywork
    • For comfort and practicability we then use premium cushioning for the base, back and arm overlays also polyester encased premium seat cushion inserts.

    Combining the traditional and modern upholstery techniques gives an authentic finish but provides practical and comfortable seating.

    In rejuvenating this classic Australian styled ‘club lounge’ our clients will be able to cherish their family memories into the future.

    See more of our high quality reupholstered furniture here.

    Call us Today to Have Your Club Lounge Professionally Reupholstered