Reupholster Chesterfield Settees

By Frank Parker

The Chesterfield sofa was developed by skilled furniture artisans in the mid 1700’s for Lord Philip Stanhope, the third Earl of Chesterfield. The Earl was known as a trendsetter and commissioned local artisans to produce an upholstered piece of furniture to which gentlemen could sit on without creasing their suits.

Chesterfields would become the most renowned sofa design in history defined by the scroll arms, low back, deep buttoning and studded trim. They were usually upholstered in dark traditionally toned leathers. However over time this design has been modernised and is often now upholstered in velvets.

A couple approached us with two 2 ½ seater Chesterfield settees purchased in the mid 1980’s being made by Moran of Melbourne. These settees were over forty years old and attracted constant use but had stood the test of time well which was a display of their quality.

We removed the existing upholstery then started the re-upholstery process by fitting new jute webbing and fitting new spring units. The foundation of the inside arms/backs were fine so we just laminated and thin foam layer with a polyester overlay and new seat cushion inserts fabricated from premium foam then encased in bonded polyester fibre. The upholstery fabric selected was again a quality plain velvet which is suitable for this design sofa while also being very durable and serviceable.

The result spoke for itself and we often find clients select fabrics similar to their original selection because of favourable performance and design suitability. This was no exception and our clients seemed overjoyed with the result.

Similar Posts

  • Ercol Furniture – upholster

    Ercol Furniture was established in 1920 by Lucian Ercolani in High Wycombe, Buckinghamshire manufacturing timber framed lounge furniture and occasional furniture. In 1944 Ercol was awarded a contract by the Government Board of Trade to produce 100 000 low cost spindled/bentwood framed chairs. This involved a process the company developed of steam pressing English Elm so the chairs could be assembled from pre-formed components.

    In 2002 Ercol moved into a purpose built factory at Princes Risborough, Buckinghamshire. The company has gone on to produce many award winning ranges of furniture. Like many western countries, the UK has in more recent years also had a reversion back to purchasing from local manufacturers.

    A client from the Peel region approached us requiring a quote to have her Ercol lounge suite re-furbished. The furniture was originally purchased by her parents in the UK prior to her birth in Australia. There had been some rather amateur attempts to both polish and re-upholster this suite which has the effect of adding to the work involved.

    We removed all the upholstery and stripped back the lacquer to bare timber. The frame was then stained a mid-tone walnut and coated with three coats of 30% gloss lacquer. Quality seat webbing was then fitted and then we fabricated premium foam cushioning laminating it with bonded polyester fibre. We disregarded the old cushion covers and made new patterns bringing everything back to original with a blue tone fabric featuring a wide abstract diamond pattern being selected by our client.

    When delivering the furniture the look on our client’s face said it all, she simply said “Amazing!” This just reinforces our factory philosophy ‘work hard and enjoy the journey’.

    Call us Today
  • Ethen Allen Furniture – Reupholster

    This American company was founded in 1932 by two brothers-in-law starting business as a homewares manufacturer. In 1936 they purchased a bankrupt high-end furniture manufacturer in Vermont and adopted the name Ethan Allen in 1939.

    Ethan Allen now a public company and has four manufacturing plants in the USA and one in Mexico with retail outlets across the USA and Canada. Although the company had suffered a severe decline in business over the last few decades the share price is now rebounding with the strong public sentiment towards supporting home grown products and businesses.

    A couple were referred to us to have their two Ethan Allen ‘Restocrat Recliners’ re-upholstered. They purchased these recliner chairs in the mid 70’s while living in the U.S. Their present home still reflected the architecture and furnishings from the 70’s so it was the preferable option.

    These recliner chairs were stripped back to the bare frames and the mechanisms were removed. The quality of the mechanisms were outstanding, we just cleaned them up with the timber frames only requiring minor repairs. The frames were re-sprung and new cushioning was fabricated from premium foam and encased with bonded polyester fibre. The fabric selected by our client was a 70’s pin stripe velvet which was a prefect replacement.

    What could we say, these recliner chairs looked like they had just been purchased from an Ethan Allen store forty five years ago! However the important thing was that our clients just loved their rejuvenated recliner chairs.

    Call us Today
  • Leather Furniture Repair

    leather furniture repair perth

    This leather is an exceptionally high quality semi-aniline leather used to upholster a beautiful contemporary settee. The client thought that the scarring was excessive and considered them as leather imperfections. With this type of rustic look natural leather defects are acceptable and indeed considered a feature. However scarring where the surface is broken can be seen as a type of leather damage and should be confined to inconspicuous areas of the upholstery.

    This was a case in which the client complained with possible good reason. The manufacture should have been more prudent with the leather cutting process and the furniture retailer should have better explained the natural features of rustic semi-aniline leather to the client. Fortunately this settee was made in Australia and both the manufacturer and retailer acted quickly  to rectify the problem resulting in a happy ending!

    Call us Today to Have Your Timeless Furniture Restored
  • Refurbish Parker Knoll chairs

    Parker Knoll Chairs Perth Restored

    The Origination of Parker Knoll

    New seat and back heavy grade elastic webbing was fitted then high-density foam was laminated to the arms and frame bodies including the outside arm and back panels which were lined and padded. Polyester filled channelled and quilted back cushion inserts were fabricated. The premium foam polyester encased seat cushion inserts were fabricated by laminating two grades of foam creating a cushion that progressively firms and ensuring greater longevity.

    The new venture was quickly successful producing high quality sprung furniture for the mass market. During the war years the company produced wooden componentry for de Havilland and repaired gliders then reversed into furniture production after 1945. With increasing the company listed in 1950 and then in the 1960’s saw vast production of recliner chairs which became a signature item.

    The company went back to private ownership in 2004 after suffering financial difficulties then went through several ownerships and now has gone back to its roots producing high quality furniture from a state of the art factory in Nottinghamshire.

    How We Restored the Parker Knoll Chairs

    A set of two Parker Knoll chairs were completely stripped of the upholstery and sanded back to the bare timber.  Three coats of lacquer were applied being sanded between coats. The frames were then lightly rubbed back with super-fine steel wool to produce the required finish.

    The client selected a 1970’s period velvet for the upholstery. The padding was fabricated by laminating premium cushioning then encased in polyester fibre. The upholstery fabric suited these chairs embracing the era.

    Our Client’s Feedback

    Our client was overwhelmed with the chairs adding these pieces to her home filled with beautiful mid-century furniture.

    Call us Today to Have Your Furniture Reupholstered
  • Reupholster Argyle Furniture

    Argyle Furniture Designs was founded by Frank Parker in 1982 and was a trading name of F.R Parker Furniture which commenced operations in Perth during the mid-1970s. Prior to this F.R. Parker & Co. commenced in 1964 operating as manufacturers’ agents in WA representing both WA and Eastern States furniture manufacturers.

    Argyle Furniture Designs manufactured a range of mainly Australian colonial styled furniture. The signature of their designs were solid well-constructed Jarrah frames featuring the Pullmaflex springing system.  Argyle Furniture Designs was sold to Karl Bloomfield of Living Choice Upholstery in 2006.

    A client contacted us having purchased an Argyle Furniture Designs lounge suite in 1989. It had received constant use over the years in their lounge room and they wanted the furniture re-upholstered. It had been originally upholstered in a high quality synthetic suede.

    We completely removed all existing upholstery and cleaned the Jarrah show-wood legs. The Pullmaflex springing system remained in excellent condition and the cushioning although originally high quality required replacing. The body padding was replaced and we fabricated new polyester encased premium seat and back cushion inserts.

    The lounge suite was upholstered in an Australian made plain chenille and upholstered to original condition. Our clients were elated with the finished result and we trust they have many years of enjoyment  using their re-upholstered lounge suite.

    Call us Today
  • Jardan Reupholster

    Jardan owned by brothers Nick & Michael Garnham commenced operations in 1987 from humble beginnings having eight staff by 1997 with over one hundred and seventy employed today.  All furniture is custom-made in a modern equipped factory located in Melbourne with retail outlets now in Brisbane, Sydney, Melbourne and Perth.

    A client approached us saying they had purchased a Jardan 3 seater settee when their children were just toddlers now their children are young adults and the settee has served them well but was in desperate need re-upholstery. Our clients were true patriots as they also selected an Australian made fabric for the re-upholstery.

    We removed all existing upholstery from the timber frame and the only casualty from almost two decades of heavy use was one broken spring which shows the value of purchasing high quality Australian made furniture. We laminated new high density foam to the frame body and fabricated polyester filled channelled and quilted back cushion inserts and polyester encased premium foam seat cushion inserts. The settee was then re-upholstered with the outside arms and back lined and padded with piped detail.

    Our clients were glad they had made the correct decision in having their settee re-upholstered in a quality Australian made fabric, it should be good for another two decades and the grandchildren.

    Call us Today