Laminated Polyurethane Fabrics

By Frank Parker

fix faux leather peeling
fix faux leather peeling

If this was your chair, you may be be thinking where can I get my chair reupholstered? Would you believe that this chair is only two years old and looks like it has been in a war zone. It is well constructed however unfortunately it was covered in a polyurethane fabric which has been affected by hydrolysis. This is when body oils and perspiration leach between the top polyurethane film and the backing fabric resulting in delamination.

This has been a continual problem for many decades with laminated polyurethane fabrics. The manufacturer, import wholesaler and retailer could only be labelled as blissfully ignorant if they were unaware of this issue.

We recommended to our client to reupholster this chair in the most durable upholstery fabric. For this we chose a commercial grade synthetic suede which will last for many years. It cost the client approximately 60% of the initial purchase price. This highlights the necessity for retail staff to be adequately trained and the necessary enforcement of consumer law. In this case as with so many, the client was left holding the baby while the supply chain were left holding the profits.

We can help you with your well worn chair to ensure that you get the best wearing upholstery fabric. So that you are enjoying your furniture for many years to come.

We Can Help You Restore Your Furniture – Just Call us Today!

Similar Posts

  • Vince’s Upholstery – Reupholster

    ByFrank Parker

    We had previously reupholstered a Parker-Knoll 60’s wing back chair for a client who then requested us to reupholster two 2 ½ seater settees purchased in the early 80’s made by Vince’s Upholstery.

    Vince’s Upholstery was founded by Vince and Pina Scalisi who originally started the business from their home in East Perth making budget priced furniture. They progressed over time and became renowned for manufacturing top end custom-made lounge furniture from a purpose built factory in Morley.

    Our clients presented us with two identical looking 2 ½ seater settees however when we removed the fabric it became obvious they were purchased at different times as one settee featured a traditional sprung edge and the other a fabricated foam edge with different springs. The challenge was to reupholster the two settees so they both felt identical for comfort.

    We re-webbed the seats and fitted new coil springs of the same height and gauge then fabricated a foam edge on one settee to replicate the sprung edge of the other. We also replaced all existing hessian and body padding however the down and feather cushion inners were still in good condition so we encased these in 200g boned polyester fibre. The settees were reupholstered to the original finish in a cotton velvet then delivered to very happy clients!

    Call us Today

  • Reupholstery of Late 19th to Mid 20th Century Classic Australian Furniture

    ByFrank Parker
    mid century chair upholstery

    This classic mid century three seater couch was manufactured in 1948 by Hicks Furniture in Kalgoorlie Western Australia. Some classic furniture was made in major WA regional centres from the late-19th century through to the mid-20th century. This was due to the problems associated with long distance transport of bulky fragile items and the fact that many skilled trades people from all walks of life migrated to these areas during the preceding gold rushes. However the other important factor is that the demand existed during this time frame for quality upholstered furniture.

    This midcentury couch was purchased by its current owner who is now 93 years of age when he was married at the age of 24, as a present for his wife. It is interesting to note that it was re-upholstered in the 1970’s. The original sprung edge was replaced with timber rails. The initial upholstery fabric was a tapestry and it was re-upholstered in an olive velvet. Unfortunately the furniture repair of this piece wasn’t detailed. It was limited to only replacing a sprung edge with timber and placing the new fabric over the old sandwiched with a layer of foam.

    We stripped the existing upholstery back to the frame then carefully knocked the joints apart, glued then clamped and screwed the frame where necessary. Our client wanted to retain the history of this mid century sofa so we simply cleaned up the show-wood timber. We also touched up the chips with an oak stain and then used a quality furniture polish to bring back the shine. The frame was then webbed and re-sprung mainly using traditional upholstery methods with an art-deco upholstery fabric. The result is that a classic Australian made couch has been given a new lease of life for future generations to enjoy.

    Call us Today to Have Your Mid Century Furniture Beautifully Restored

  • Ramada Furniture – Reupholster

    ByFrank Parker

    Ramada Furniture commenced operations in the mid 1980’s and was owned by Graham and Justin Davies. Graham also owned Leather House a successful furniture retail business specialising in the sale of leather lounge furniture. His son Justine operated the factory in Canning Vale which took over a large purpose built factory from another lounge furniture manufacturer Stylecraft which had ceased operations.

    Grahame Davies sold Leather House in the early 2000’s and Ramada Furniture was subsequently sold to Lawrence Barnard. Lawrence also owned Featureline which locally manufactured more budget priced lounge furniture. He then operated the combined businesses wholesaling lounge furniture to the WA retail trade.  However due a changing market and the onslaught of inferior but cheaper imported lounge furniture the combined business failed after about 3 years.

    A couple approached us who were renovating their home which required updating their furniture. They were however mindful regarding waste and wanted to up-cycle as much as possible. They had purchased Ramada two leather lounge chairs and a footstool about thirty years ago which were looking seriously dated and if possible wanted them rejuvenated in fabric.

    We completely removed the existing upholstery from the two chairs and footstool then started the re-upholstery process fitting new heavy grade elastic webbing. High density foam was then laminated to the frame bodies and new polyester encased premium foam cushion inserts were fabricated. The lounge furniture was then carefully re-upholstered to original finish except the seat cushions were now reversible.

    Our clients were absolutely delighted with the result of their up-cycling. The chairs and footstool have again taken pride of place in their renovated upstairs sitting area.

    Call us Today

  • Ethen Allen Furniture – Reupholster

    ByFrank Parker

    This American company was founded in 1932 by two brothers-in-law starting business as a homewares manufacturer. In 1936 they purchased a bankrupt high-end furniture manufacturer in Vermont and adopted the name Ethan Allen in 1939.

    Ethan Allen now a public company and has four manufacturing plants in the USA and one in Mexico with retail outlets across the USA and Canada. Although the company had suffered a severe decline in business over the last few decades the share price is now rebounding with the strong public sentiment towards supporting home grown products and businesses.

    A couple were referred to us to have their two Ethan Allen ‘Restocrat Recliners’ re-upholstered. They purchased these recliner chairs in the mid 70’s while living in the U.S. Their present home still reflected the architecture and furnishings from the 70’s so it was the preferable option.

    These recliner chairs were stripped back to the bare frames and the mechanisms were removed. The quality of the mechanisms were outstanding, we just cleaned them up with the timber frames only requiring minor repairs. The frames were re-sprung and new cushioning was fabricated from premium foam and encased with bonded polyester fibre. The fabric selected by our client was a 70’s pin stripe velvet which was a prefect replacement.

    What could we say, these recliner chairs looked like they had just been purchased from an Ethan Allen store forty five years ago! However the important thing was that our clients just loved their rejuvenated recliner chairs.

    Call us Today

  • Re-upholster Antique Chairs

    ByFrank Parker

    Occasionally we receive antique chairs which are basically well preserved but they have been previously shabbily re-upholstered or upholstered out of context with the era. This rarely does the furniture justice and usually results in complete restoration.

    Our client came to us with a lounge chair made in the 1890’s having been originally purchased by her deceased husband’s grandparents. She was honest in explaining that under her instructions the chair had been re-upholstered in the early 1980’s in a pastel cotton and the style modernised to match their décor at a previous residence. She was now ashamed of her previous decision and wanted the chair re-upholstered to its previous glory.

    The chair’s design had been modernised by having a loose seat cushion fitted and absence of piped detail. We removed all the upholstery stripping the chair down to the bare frame and the turned timber legs were then cleaned and polished. Heavy weight jute webbing was then fitted to the seat and back, the coil springs laced, tied down then hessian overlays fitted. We used synthetic ‘thumb roll’ on the seat front, arms and back scrolls then laminated premium polyurethane foams finished with polyester overlays. The seat cushion inner was fabricated from high resilience foam and encased with bonded polyester fibre.

    The chair was then upholstered using a fabric selected by our client which suited the chair and was basically in keeping with the period. The result was a chair which was modernised to a degree under the cover for comfort however retained much authenticity with the upholstery finish and piped detail. Our client was over joyed with her chair and no doubt will become a family heirloom.

    Call us Today

  • Reupholster Argyle Furniture

    ByFrank Parker

    Argyle Furniture Designs was founded by Frank Parker in 1982 and was a trading name of F.R Parker Furniture which commenced operations in Perth during the mid-1970s. Prior to this F.R. Parker & Co. commenced in 1964 operating as manufacturers’ agents in WA representing both WA and Eastern States furniture manufacturers.

    Argyle Furniture Designs manufactured a range of mainly Australian colonial styled furniture. The signature of their designs were solid well-constructed Jarrah frames featuring the Pullmaflex springing system.  Argyle Furniture Designs was sold to Karl Bloomfield of Living Choice Upholstery in 2006.

    A client contacted us having purchased an Argyle Furniture Designs lounge suite in 1989. It had received constant use over the years in their lounge room and they wanted the furniture re-upholstered. It had been originally upholstered in a high quality synthetic suede.

    We completely removed all existing upholstery and cleaned the Jarrah show-wood legs. The Pullmaflex springing system remained in excellent condition and the cushioning although originally high quality required replacing. The body padding was replaced and we fabricated new polyester encased premium seat and back cushion inserts.

    The lounge suite was upholstered in an Australian made plain chenille and upholstered to original condition. Our clients were elated with the finished result and we trust they have many years of enjoyment  using their re-upholstered lounge suite.

    Call us Today