Reupholstery of Late 19th to Mid 20th Century Classic Australian Furniture

By Frank Parker

mid century chair upholstery
mid century chair upholstery

This classic mid century three seater couch was manufactured in 1948 by Hicks Furniture in Kalgoorlie Western Australia. Some classic furniture was made in major WA regional centres from the late-19th century through to the mid-20th century. This was due to the problems associated with long distance transport of bulky fragile items and the fact that many skilled trades people from all walks of life migrated to these areas during the preceding gold rushes. However the other important factor is that the demand existed during this time frame for quality upholstered furniture.

This midcentury couch was purchased by its current owner who is now 93 years of age when he was married at the age of 24, as a present for his wife. It is interesting to note that it was re-upholstered in the 1970’s. The original sprung edge was replaced with timber rails. The initial upholstery fabric was a tapestry and it was re-upholstered in an olive velvet. Unfortunately the furniture repair of this piece wasn’t detailed. It was limited to only replacing a sprung edge with timber and placing the new fabric over the old sandwiched with a layer of foam.

We stripped the existing upholstery back to the frame then carefully knocked the joints apart, glued then clamped and screwed the frame where necessary. Our client wanted to retain the history of this mid century sofa so we simply cleaned up the show-wood timber. We also touched up the chips with an oak stain and then used a quality furniture polish to bring back the shine. The frame was then webbed and re-sprung mainly using traditional upholstery methods with an art-deco upholstery fabric. The result is that a classic Australian made couch has been given a new lease of life for future generations to enjoy.

Similar Posts

  • Upholstery Up-cycling

    Over the decades we have found considerable change in consumer sentiment towards reducing waste and up-cycling furniture. This tends to mainly occur with furniture that is built to last but the design has become out dated over time. Unfortunately lower quality furniture after several years of use ends up on verge collections, unnecessarily depleting resources and contributing to the landfill problem.  

    A client approached us with a Moran sofa-bed she had purchased many years ago as a student as she required both a sofa and some were to sleep. This was well constructed and the bed action was very good condition warranting re-upholstery.

    We completely removed the existing upholstery and laminated new high density foam padding to the frame body. Then fabricated new polyester filled channelled and quilted back cushion inserts and new polyester encased premium foam seat cushion inserts. The upholstery finish was modified deleting the skirts and replacing them with piped borders. The result was a smart contemporary sofa-bed which will function for another few decades.

    We were also approached by a senior citizens home with quality furniture however it had become outdated over time and was also looking slightly tired. We suggested the settees could be re-styled with some cosmetic changes to the upholstery.

    The settees were stripped to the frames then new heavy grade elastic webbing fitted and high density foam laminated to the body work. New channelled and quilted polyester filled back cushion inserts were fabricated and polyester encased premium foam seat cushions were also constructed. The main change in the upholstery was the deletion of skirts which was replaced in the front by a padded piped border with the outside arms and backs also then lined and padded providing a plush finish. The previous fabric was a striped satin weave and was replaced with a fresh looking abstract floral in a flat weave. The clients were elated with the result!

    Call us Today
  • Le Cornu Furniture – reupholster

    Le Cornu was an iconic South Australian furniture manufacturing and retailing business. Operations commenced in 1861 when Phillip Le Cornu started a wholesale cabinet making business in Adelaide. In 1885 the factory was largely destroyed by fire and recommenced operations at a former church in North Adelaide. In 1921 the founder died and his son Phillip took over the business expanding operations and by 1924 employed 25 people.

    In 1954 the business went factory direct with a diversified range of furniture and over the next two decades expanded retail stores in S.A and Darwin. In 1989 the North Adelaide store was closed and then the business was sold to Fantastic Holdings in 2008.

    Our client approached us wanting to re-upholster a settee purchased by his parents from Le Cornu in 1959. This settee was the surviving piece of the lounge suite which he grew up with and lounged upon as a teenager. It was still upholstered in the original fabric being a ribbed velvet which would have been the latest trend at the time of purchase.

    We removed all the existing upholstery from the settee frame and it was well constructed with little structural work required. The frame was re-sprung with heavier gauge no-sag springs on the seat and the back springs were replaced with the same gauge. The springs were linked, outside arms and back were lined with hessian and high density body work padding applied. The original cushion inserts were latex and these were replaced with polyester encased premium cushions. The two seater settee was then upholstered to its original finish in a ribbed Zepel gold velvet.

    Our client was gobsmacked upon delivery of the settee saying it was just as he remembered it as a child growing up in Adelaide.

    Call us Today
  • Restoring Fler Chairs

    Fred Lowen and Earnest Rodeck met on a refugee ship escaping Nazi Europe bound for Port Melbourne. Fred Lowen started work in 1942 as a fitter and turner but woodturning was his passion. The two commenced their business in 1946 under the acronym FLER starting in an old stable.

    The business grew quickly as they engaged with Myer Emporium supplying modern designs with turned legs and Scandinavian influence. By the mid-late 1960’s Fler had manufacturing operations is several states. The massive demand for this style of furniture in Australia was created by the post-war residential boom in modern housing.

    A couple were referred onto us as they had two Fler SC55 chairs produced in the late 1950’s and two E31 chairs from the 1960’s requiring complete restoration. They originally were purchased new by her parents but unfortunately were very poorly ‘restored’ by a supposedly reputable business in the 1980’s. Given this we had to completely strip the chairs back to the raw timber frames with the intention of restoring them to their original splendour.

    With the frames completely sanded back the timber was stained Mahogany then three coats of clear lacquer. The cushion inserts were originally latex rubber however premium polyurethane foam encased with bonded polyester fibre is more durable and provides superior comfort. We re-upholstered the chairs in a velvet using the original finishing methods resulting in glowing fine lines.

    Our clients were astounded with the result taking her back remembering the chairs in bygone years. This work also provides great pleasure for us as furniture manufacturers and restorers.

    Call us Today
  • Ramada Furniture – Reupholster

    Ramada Furniture commenced operations in the mid 1980’s and was owned by Graham and Justin Davies. Graham also owned Leather House a successful furniture retail business specialising in the sale of leather lounge furniture. His son Justine operated the factory in Canning Vale which took over a large purpose built factory from another lounge furniture manufacturer Stylecraft which had ceased operations.

    Grahame Davies sold Leather House in the early 2000’s and Ramada Furniture was subsequently sold to Lawrence Barnard. Lawrence also owned Featureline which locally manufactured more budget priced lounge furniture. He then operated the combined businesses wholesaling lounge furniture to the WA retail trade.  However due a changing market and the onslaught of inferior but cheaper imported lounge furniture the combined business failed after about 3 years.

    A couple approached us who were renovating their home which required updating their furniture. They were however mindful regarding waste and wanted to up-cycle as much as possible. They had purchased Ramada two leather lounge chairs and a footstool about thirty years ago which were looking seriously dated and if possible wanted them rejuvenated in fabric.

    We completely removed the existing upholstery from the two chairs and footstool then started the re-upholstery process fitting new heavy grade elastic webbing. High density foam was then laminated to the frame bodies and new polyester encased premium foam cushion inserts were fabricated. The lounge furniture was then carefully re-upholstered to original finish except the seat cushions were now reversible.

    Our clients were absolutely delighted with the result of their up-cycling. The chairs and footstool have again taken pride of place in their renovated upstairs sitting area.

    Call us Today
  • Reupholster Arthur G Furniture

    Perth Arthur G Furniture

    The History of Arthur G Furniture

    Arthur G was established in 1979 Arthur Georgopoulus having initially commenced leather sofas in the garage at the family home in Melbourne. Today Arthur G has a large manufacturing operation in Huntingdale. His son Leonard joined the family business in 2008 with the focus then changing to direct sales. Arthur G now has showrooms in Melbourne, Sydney and Perth. 

    How We Reupholstered This Piece of Arthur G Furniture

    It’s always a pleasure to re-upholster high quality Australian made furniture. The Arthur G furniture pictured was only about 10 years old however our clients were shifting into a new residence and wanted their furniture re-upholstered to coordinate with the new décor.

    The Furniture Reupholstery Process

    We completely stripped down the existing furniture revealing solid Victorian Ash timber frames and quality upholstery componentry. We encased the existing down/feather cushion inserts with bonded polyester providing a silky finish to the cushioning however there was no maintenance work involved. The settee was re-covered in a plush pink cut-pile velvet and the chaise lounge in Tasman ‘Matisse’ leather.

    Happy Clients

    Our clients were ecstatic with their re-upholstered furniture which we trust they will enjoy for many years into the future.

    Call us Today To Have Your Leather Sofa Reupholstered
  • Refurbish Parker Knoll chairs

    Parker Knoll Chairs Perth Restored

    The Origination of Parker Knoll

    New seat and back heavy grade elastic webbing was fitted then high-density foam was laminated to the arms and frame bodies including the outside arm and back panels which were lined and padded. Polyester filled channelled and quilted back cushion inserts were fabricated. The premium foam polyester encased seat cushion inserts were fabricated by laminating two grades of foam creating a cushion that progressively firms and ensuring greater longevity.

    The new venture was quickly successful producing high quality sprung furniture for the mass market. During the war years the company produced wooden componentry for de Havilland and repaired gliders then reversed into furniture production after 1945. With increasing the company listed in 1950 and then in the 1960’s saw vast production of recliner chairs which became a signature item.

    The company went back to private ownership in 2004 after suffering financial difficulties then went through several ownerships and now has gone back to its roots producing high quality furniture from a state of the art factory in Nottinghamshire.

    How We Restored the Parker Knoll Chairs

    A set of two Parker Knoll chairs were completely stripped of the upholstery and sanded back to the bare timber.  Three coats of lacquer were applied being sanded between coats. The frames were then lightly rubbed back with super-fine steel wool to produce the required finish.

    The client selected a 1970’s period velvet for the upholstery. The padding was fabricated by laminating premium cushioning then encased in polyester fibre. The upholstery fabric suited these chairs embracing the era.

    Our Client’s Feedback

    Our client was overwhelmed with the chairs adding these pieces to her home filled with beautiful mid-century furniture.

    Call us Today to Have Your Furniture Reupholstered