Reupholstery of Jarvi Furniture Lounge

By Frank Parker

A Special Wedding Gift

A couple were getting married and had requested of their wedding guests to contribute to the re-upholstery of their ‘Jarvi’ lounge suite. This lounge furniture with a matching table and cabinetry was purchased by the Groom in NSW some time ago and the fabric for the re-upholstery selected by the Bride.

The History of Jarvi Furniture

Jarvi Furniture was founded by Len Jarvi, who was born in Finland in 1910. Len migrated to Australia learning his trade at Chesterfield Furniture in Botany NSW. He then established Jarvi Furniture in Sydney after the war. They were focused on manufacturing high quality lounge and dining furniture influenced on the Jacobean style of furniture. Len Jarvi died in an accident on his farm in 1959 however his quality furniture still lives on today.

The Lounge Suite Restoration Process

We worked on restoring the frame of the lounge through the following process:

  • Stripped this lounge suite down to the bare frame
  • Repaired several minor structural defects
  • cleaned and polished the show-wood frame
  • re-webbed the bases with jute webbing
  • coil springs were laced into place and then overlayed with hessian
  • Several modern materials were used to finish of the sprung edge (whilst maintaining quality)
  • Placed a synthetic thumb-roll on the front edge and
  • Then finished with a high density foam overlay

Finally, the front edge and borders were hand sewn to give the traditional finish.

The Final Part of the Lounge Reupholstery

The seat and back cushions were box piped using cotton piping cord. We also incorporated zip borders so the cushions are removable. The cushion inserts we used were laminated premium quality polyurethane foams encased in bonded polyester fibre. The result being firm resilient cushioning that will last for decades.

Such a special gift for this newly married couple.

Call us Today to Get Your Furniture Reupholstered

Similar Posts

  • Re-upholster antique chaise lounge

    ByFrank Parker

    When given a restored antique chaise lounge frame to re-upholster the problem is that there may have been many different ways it was traditionally upholstered. Therefore the method of upholstery depends upon the client’s interpretation on how the furniture appeared originally combined with the restorer’s knowledge and research into period pertaining to this style of furniture.   

    This antique chaise lounge frame was given to us by a client who wanted it upholstered for her bedroom. Apparently this piece originated from the 1880’s and she did not want any deep buttoning in the upholstery. We went through much archival material on chaise lounges from this period and found examples of similar double ended pieces from this period with plain upholstery which coincided with our client’s expectations. Above all our client also wanted the re-upholstered chaise to be comfortable giving us considerable autonomy regarding upholstery methods.

    We set about our task and first cleaned and repaired the original castors. We then webbed the base with heavy weight jute webbing, laced in the coil springs, tied them down then fitted a hessian overlay. We then used synthetic furniture edging and built the seat, back and scroll ends up with varying hardness’s of high density cushioning encased with bonded polyester fibre. The result of building up the platforms this way is that the traditional look is maintained however unlike the furniture from this era comfort has not been sacrificed for style. The upholstery was trimmed with matching gimp trim creating a superb finish.

    Our client was elated with the stylish finish of her re-upholstered antique chaise lounge but was equally impressed with the comfort which would not have been such a necessity in the bygone days. We trust our client will enjoy and relax on her rejuvenated chaise lounge for many years.

    Call us Today

  • Reupholster to Modernise

    ByFrank Parker

    Clients approached us as they had shifted from an older traditional styled house into a new modern mid-century styled home located in the Perth hills. They had a much loved traditional Torrance & McKenna lounge suite consisting of 2 x wing back chairs and a low back 4 seater settee. They wanted to retain this lounge furniture but re-upholster it to suit their new home.

    The most important aspect of this process is to select an appropriate fabric for the re-upholstery process. Our clients had two issues to consider, the upholstery fabric selected had to suit their existing lounge furniture while looking in place in a new mid-century styled home. The upholstery fabric selected fulfilled the criteria being an abstract floral design with the blue and autumn tones looking effective on the polished concrete floor and picking up the tones of the timber cabinetry.

    This job was a complete re-build so we removed all the existing upholstery. The frame was re-webbed with heavy weight jute webbing and the coil springs laced into place then the sprung edges constructed. New high density foam padding was laminated to the frame bodies with the upholstery back to original including lined and padded outside arms and backs. The cushion inserts were fabricated using premium foam and then encased with bonded polyester fibre. The cushions were upholstered back to the original finish being boxed piped seats and centre piped back and arm cushions.

    The result spoke for its self and our clients were ecstatic when their re-upholstered furniture was delivered. This is great example of up-cycling fine furniture which was purchased new 45 years ago and is now good for another 45 years.

    Call us Today

  • Laminated Polyurethane Fabrics

    ByFrank Parker
    fix faux leather peeling

    If this was your chair, you may be be thinking where can I get my chair reupholstered? Would you believe that this chair is only two years old and looks like it has been in a war zone. It is well constructed however unfortunately it was covered in a polyurethane fabric which has been affected by hydrolysis. This is when body oils and perspiration leach between the top polyurethane film and the backing fabric resulting in delamination.

    This has been a continual problem for many decades with laminated polyurethane fabrics. The manufacturer, import wholesaler and retailer could only be labelled as blissfully ignorant if they were unaware of this issue.

    We recommended to our client to reupholster this chair in the most durable upholstery fabric. For this we chose a commercial grade synthetic suede which will last for many years. It cost the client approximately 60% of the initial purchase price. This highlights the necessity for retail staff to be adequately trained and the necessary enforcement of consumer law. In this case as with so many, the client was left holding the baby while the supply chain were left holding the profits.

    We can help you with your well worn chair to ensure that you get the best wearing upholstery fabric. So that you are enjoying your furniture for many years to come.

    We Can Help You Restore Your Furniture – Just Call us Today!

  • Mechanical rocker/glider chair – reupholster

    ByFrank Parker

    Mechanical rocker/glider chairs or platform rocker chairs are a type of rocking chair which moves as a swing seat, where the entire frame of the seat is attached to the base by means of a double rocker four bar linkage. The non-parallel suspension arms of the linkage cause the chair to simulate the motion of a rocking chair. The mechanical rocker/glider chairs were first manufactured in the United States and Canada during the 1930’s.

    Our client in her late 80’s approached us to rejuvenate her rocker glider chair and we just loved her story. As a young child in the pre-war years she travelled from her home in Rugby England with her father by train to Edinburgh Scotland to visit her grandmother. Apparently her grandmother had very strict house rules however when she had the chance she would love to rock in her grandmother’s chair. A few years later after the passing of her grandmother her aunty asked if she would like any of her grandmother’s possessions with the obvious response, “the rocking chair”. Then some eighty years later we were given the task of reupholstering her special chair.

    Our client had selected an olive cut pile cotton velvet for the upholstery which suited the chair and reflected the era. All the upholstery was removed from the chair then the timber frame was cleaned and polished. Jute webbing was fitted over the seat and then a hessian overlay and premium padding with a polyester overlay. After the outside back was fitted the same process as the seat occurred then the arms pads were built up with premium padding and polyester overlays. The inside back, seat and arm pads were then upholstered and unlike the original chair which was trimmed with gimp we used self-covered banding which was then space studded.

    When the chair was delivered our client had tears of joy saying this was something she had wanted to do all her life.

    Call us Today

  • Re-upholster Antique Chairs

    ByFrank Parker

    Occasionally we receive antique chairs which are basically well preserved but they have been previously shabbily re-upholstered or upholstered out of context with the era. This rarely does the furniture justice and usually results in complete restoration.

    Our client came to us with a lounge chair made in the 1890’s having been originally purchased by her deceased husband’s grandparents. She was honest in explaining that under her instructions the chair had been re-upholstered in the early 1980’s in a pastel cotton and the style modernised to match their décor at a previous residence. She was now ashamed of her previous decision and wanted the chair re-upholstered to its previous glory.

    The chair’s design had been modernised by having a loose seat cushion fitted and absence of piped detail. We removed all the upholstery stripping the chair down to the bare frame and the turned timber legs were then cleaned and polished. Heavy weight jute webbing was then fitted to the seat and back, the coil springs laced, tied down then hessian overlays fitted. We used synthetic ‘thumb roll’ on the seat front, arms and back scrolls then laminated premium polyurethane foams finished with polyester overlays. The seat cushion inner was fabricated from high resilience foam and encased with bonded polyester fibre.

    The chair was then upholstered using a fabric selected by our client which suited the chair and was basically in keeping with the period. The result was a chair which was modernised to a degree under the cover for comfort however retained much authenticity with the upholstery finish and piped detail. Our client was over joyed with her chair and no doubt will become a family heirloom.

    Call us Today

  • Reupholster Parker Furniture

    ByFrank Parker

    Parker Furniture commenced operations in 1935 as Dagger & Parker formed by Alf Dagger and Jack Parker making chairs and cabinets fashioned from packing palettes. Post war they manufactured reproduction Queen Anne and Art Deco designs then Alf Dagger resigned and the business was renamed JW Parker and then Parker Furniture.

    Tony Parker joined the business in 1949 working in the polishing and finishing area while studying furniture design at East Sydney Technical College at night. Tony then left the business for the UK working in furniture sales management and design for John Lewis. Jack reluctantly made some of Tony’s modernist UK inspired designs but showed little commitment in promoting these designs. Tony then displayed these new designs at the Sydney Furniture Exhibition with a year’s production being sold in four days! Grace Bros. then stocked and displayed these new designs with sales expanding so did the staff and the factories. After several shifts Parker Furniture premises was situated on eight hectares at Seven Hills and the business employed over 380 staff by 1973.  

    The brothers sold the family business in 1990’s but without their enthusiasm and due to a changing market the company had closed by 1997. Covermore Designs rose from the ashes formed by former Parker employees and is still going strong today manufacturing some classic company designs and re-furbishing past production pieces.

    A client approached wanting her Parker lounge suite to be re-upholstered. They had previously lived in Sydney and had purchased this suite in the early 1980’s. The lounge suite remained in exceptional condition, partially due to care but also testament to the quality design and construction.

    Our client selected a linen similar to her original choice for the re-upholstery. We removed the existing upholstery with the timber frame and springing system still in superb condition. New premium padding was laminated onto the arms and frame body. New polyester encased premium seat cushions were fabricated also polyester filled channelled and quilted back cushion inners were made. The lounge suite was then re-upholstered being carefully pattern matched at all stages.

    Our client was overwhelmed with her re-upholstered Parker lounge suite as it was delivered into her home it took her back to a bygone time.

    Call us Today