1960’s American Sofa-Bed

By Frank Parker

Sofa Bed Reupholstery Perth
Sofa Bed Reupholstery Perth

1960’s American Sofa Bed Restoration

It started with a home consultation for our client

This is the sofa-bed’s history

Upon inspection of this sofa-bed it became apparent that it was made in the U.S in 1968. The frame was constructed from solid American Oak. The sofa-bed action was manufactured by Windsor of Canada who are renowned for their high quality mechanical componentry which tended to be over engineered and will subsequently last the decades. The result was with such a robust frame and action the sofa-bed was to be re-upholstered.

The restoration process

 We removed the sofa-bed action and stripped the existing upholstery to the frame. The upholstery fabric selected by our client was similar to the original cover so it was guaranteed suitable. The cushion inserts were down and feather so we encased these in a bonded polyester fibre and replaced all the body padding with high density foam. We basically used the same upholstery techniques but tidied up the finish including doing the skirt in three sections to match the back cushions.

Happy clients of Parker Interiors

The final result is fine and yet functional sofa-bed superbly rejuvenated for our clients to enjoy for many years into the future.

Similar Posts

  • Refurbish Moran chairs

    Our Clients’ Favourite Two Moran Chairs

    A local Perth client approached us who had acquired quality pieces of furniture during the 1960’s and 70’s but was having to downsize and could only take her favourite two Moran chairs purchased new in 1972.

    The Moran Furniture Story

    The Moran story started with John Moran completing his upholstery apprenticeship then starting John Moran Furniture in 1950 at his mother’s garage then shifting to a rented factory. Moran Furniture grew over the decades providing furniture for several generations of Australians.

    The Steps for Repairing These Chairs

    These Moran chairs were worthy of complete reupholstery as the frames were sturdy and the sprung edge was in good condition. The original upholstery was stripped to the frame and the rejuvenation process began by doing the following:

    • new jute webbing
    • hessian
    • high density foam overlays
    • polyester encased premium cushion inserts

    The result is these two luxurious chairs are in new condition ready for many more years of enjoyment.

    The Moran Five Points of Difference

    Moran Furniture was always marketed with the “5 Points of Difference”

    1. Genuine 8 way hand tied springs
    2. Spring cell seat cushions
    3. Body correct lumbar support
    4. Kiln dried, close grain hardwood timber
    5. Premium leathers & fabrics

    Our customer was thrilled with their Moran Furniture repairs.

    Call us Today to Have Your Moran Furniture Repaired
  • Le Cornu Furniture – reupholster

    Le Cornu was an iconic South Australian furniture manufacturing and retailing business. Operations commenced in 1861 when Phillip Le Cornu started a wholesale cabinet making business in Adelaide. In 1885 the factory was largely destroyed by fire and recommenced operations at a former church in North Adelaide. In 1921 the founder died and his son Phillip took over the business expanding operations and by 1924 employed 25 people.

    In 1954 the business went factory direct with a diversified range of furniture and over the next two decades expanded retail stores in S.A and Darwin. In 1989 the North Adelaide store was closed and then the business was sold to Fantastic Holdings in 2008.

    Our client approached us wanting to re-upholster a settee purchased by his parents from Le Cornu in 1959. This settee was the surviving piece of the lounge suite which he grew up with and lounged upon as a teenager. It was still upholstered in the original fabric being a ribbed velvet which would have been the latest trend at the time of purchase.

    We removed all the existing upholstery from the settee frame and it was well constructed with little structural work required. The frame was re-sprung with heavier gauge no-sag springs on the seat and the back springs were replaced with the same gauge. The springs were linked, outside arms and back were lined with hessian and high density body work padding applied. The original cushion inserts were latex and these were replaced with polyester encased premium cushions. The two seater settee was then upholstered to its original finish in a ribbed Zepel gold velvet.

    Our client was gobsmacked upon delivery of the settee saying it was just as he remembered it as a child growing up in Adelaide.

    Call us Today
  • Interesting Mid Century Furniture

    mid century modern furniture restoration

    When clients show us furniture that is in need of restoration we sometimes come across some very interesting furniture pieces. This mid century chair and footstool manufactured by Westnofa Furniture Company, is one such piece.

    Westnofa furniture is one of the great success stories of the Norwegian furniture industry. The name was derived from the combination of WEST NOrway FActories and was formed in the late 1950’s by a collaboration of the country’s leading furniture manufacturers. The goal was to combine forces to market and export locally produced furniture.

    This mid-century chair and footstool were in a dilapidated condition when received at the factory for rejuvenating. The furniture frames that were still assembled were carefully knocked apart, the joints were cleaned up and the pieces individually sanded before being re-assembled with the fractured components using a two-pack resin. The wood frames were then lightly sanded, stained light walnut, received three coats of lacquer between sanding and then finished off with a rub down using super fine steel wool.

    The chair and footstool plywood shells were stripped of the old latex rubber which had perished and were laminated with premium polyurethane foam. The upholstery fabric selected by the clients was a luxurious quilted velvet. This was precisely cut and sewn using old patterns and intuition. The reupholstering process involved exceptional skill including delicate slip-stitching.

    The result of this intensive labour and delicate work by a master upholsterer is a beautifully recovered mid century chair and footstool that will be loved by future Western Australian generations.

    Call us Today to Have Your Mid Century Furniture Reupholstered
  • Why do modern sprung cushions have problems?

    cushion upholstery Perth

    What are contemporary sprung cushions?

    Contemporary sprung cushions have been marketed over the last decade as a superior concept however there are major issues regarding the effectiveness of using ‘spring pockets’ in the fabrication of seat cushion inserts.

    How are traditional spring cushions different to modern spring cushions?

    Traditional sprung cushions were constructed using mid-gauge coil springs and hand sewn into a hessian case then encased with flock and fitted into a box piped seat cushion with sewing usually finished by hand stitching. Seat cushions constructed this way tend to stand the test of time as is evident by cushions still used in antique furniture.

    However the fabrication of modern sprung cushion inserts utilise light-gauge coil springs encased in a series of thin polyester pockets which are normally referred to as ‘spring pockets’. These spring pockets are placed in the centre of the cushion inserts and sandwiched with polyurethane foam then usually encased with polyester fibre. With moderate to heavy use the spring pockets tend to distort with the springs often fracturing the casings. The result is a distorted and uncomfortable seat cushion and maybe a costly repair bill outside the warranty period.

    What about the option of premium quality foam cushions?

    The sales personnel promoting the “advantages” of sprung cushions usually infer by definition that the base is also sprung but most sprung cushions are on bases fitted with elastic webbing. The truth is that there is nothing wrong with a settee base correctly fitted with high quality elastic webbing. However a superior cushion insert can be effectively achieved by simply using premium quality polyurethane foam encased in polyester fibre and no spring pockets!

    Call Us To Help You With the Cushions on Your Furniture
  • Re-upholstery of a Jason Recliner Chair

    reupholster Jason recliner Perth

    Transforming the Classic Jason Recliner

    Jason recliner chairs are an iconic piece of Australian furniture valued for their quality craftsmanship and durability, making them sought after to this day. This restoration aimed to preserve the chair’s structure for future generations to come.

    The Origin of Jason Recliners

    Jason chairs were manufactured under license from Lazy Boy in Munro Michigan. The factory operated in Welshpool WA from the mid 1960s through to about 1990. These chairs were known for featuring a very robust and unique mechanism. The business was owned and managed by the Bridge family with the chairs distributed around Australia and at its peak they were also exported.

    This is Our Restoration Process

    • The chair was completely stripped and the mechanism cleaned and lubricated
    • The show-wood rocker base and the turned wing sections were sanded and re-lacquered dark walnut
    • The back zig zag springs were linked
    • New hessian was layered over the seat springs
    • New high density padding was laminated onto the body
    • New polyester encased premium cushioning was fabricated and
    • The chair was then re-upholstered to the same finish in an English Heritage Linen
    This chair was also of sentimental value as it previously belonged to our client’s father. We wish her many years of memorable moments in this special chair.
    Call us Today to Find Out About Restoring Your Chair

  • Our Refurbishing of T.H Brown chairs

    TH Brown Chairs Reupholstered Perth

    The History of Thomas Howard Brown

    Thomas Howard Brown formed T.H Brown during 1911 in Adelaide. The brand became a household name in furniture during the first half of the 20th century being one of Australia’s largest furniture manufacturers by the 1920’s and producing its two millionth chair by the 1940’s.

    Thomas’s son Peter joined the business after his return from WWII and went on to develop some of T.H. Brown’s most iconic pieces of furniture. Peter and his brother Napier ran the business until 1987 when T.H. Brown was sold to Work Space Commercial Furniture.

    Thomas’s grandson Simon joined the business in 2015 and formed a joint operation to re-launch some of T.H. Brown’s mid-century signature pieces.

    Our Client’s TH Brown Chairs

    Our client has a classic mid-century home and wished to furnish it appropriately. She had acquired a substantial range of pre-loved furniture from this era over several years and we were fortunate in been given the task of restoring these pieces.

    The Reupholstery Process We Undertook

    One of our tasks was to restore a set of six T.H. Brown dining chairs.

    • We carefully stripped these chairs down
    • Due to the quality of construction few repairs were required
    • The chairs were then carefully sanded back
    • Three coats of clear lacquer were applied being sanded back between coats
    • The frames were then gently rubbed back with super fine steel wool to enhance the matt finish required
    • We then laminated the seat ply panel with high density premium padding and
    • Upholstered the seat with a classic mid-century textured velvet.

    This beautiful mid-century furniture was completely rejuvenated to its bygone glory days and our client is now living out her dream.

    Call us Today to Have Your Dining Chairs Reupholstered