Uncategorized

  • Re-styled 1940’s chairs

    ByFrank Parker

    Occasionally clients are unhappy with the style of the chairs presented to us for repair and re-upholstery. This can be as a result of either initial design flaws, poor re-upholstery or poor reconstruction as a result of previous damage or sometimes a combination of these factors. The idea is not necessarily to bring a chair back its purest original form but occasionally compromise with slight re-styling to compliment the client’s décor.

    These two 1940’s chairs were presented to us by a client as they had been passed down to her through the family. She wanted the chairs to be re-upholstered however she wanted the arms modified on one chair and the wings to be altered on the other chair. This re-styling was required partially due to initial design flaws but also due to past re-upholstery exaggerating these flaws.

    We completely stripped the existing upholstery on both chairs down to the bare frames. The top arms on one chair were then cut down to a cigar shaped arm in keeping with the design while the other chair had a plywood strip removed from the inside wings which improvised as a thumb roll. The two modified chair frames were then re-upholstered using a combination of traditional and contemporary methods.

    When these re-styled chairs were delivered to our client she was ecstatic with the outcome. We trust the chairs will be enjoyed and continued to be passed down to future generations.

    Call us Today

  • Refurbish TV Chairs & Daynite sofa

    ByFrank Parker

    “TV chairs” and “Daynite sofas” became popular from the late 1950’s and remained in production through to the early 1970’s. This coincided with the introduction of television and the modern appliance age. Today we generally refer to TV chairs and Daynite sofas as mid-century furniture which has regained popularity amongst novices and enthusiasts of this era. This furniture setting was made in W.A. by Condor Furniture in Osborne Park owned by the Trethowan family.

    This set of TV chairs and Daynite sofa were presented to us by our client who wanted them completely refurbished to original condition. The existing upholstery was striped to the frames then the frames sanded back to raw timber. The timber frames were constructed from Nyatoh, a Malaysian timber which is ideal for this type of furniture. The frames were then stained brown teak and three coats of clear lacquer applied.

    The new upholstery started with replacing the no-sag springs then fabricating polyester encased premium cushion inserts. The upholstery fabric selected was similar to the original covering being a flat woven rust coloured fabric.

    The result was a refurbished classic mid-century lounge setting that took our clients back to the time of their initial purchase. We have no doubt that just as nostalgic memories will be relived good times are still to come for our clients to enjoy their furniture.

    Call us Today

  • Co-ordinating classic chairs

    ByFrank Parker

    Timberline Furniture commenced operations in Perth WA with the factory being located in Willetton. The furniture manufacturing business was founded by Ron Jones and Hedley Van Der Straaten in the early 70’s and ran through to the mid 90’s with about 10 – 12 staff. Ron was a Wood-Turner by trade and managed operations with Hedley managing sales and general business. Timberline predominantly manufactured dining furniture but also made some lounge and occasional furniture. During the 80’s they entered into a collaborative venture with co-ordinated designs, Trustyle Furniture making the lounge suites, George’s Cabinets making the cabinetry and Timberline the dining suites. These co-ordinated furniture ranges were sold by furniture retailers throughout W.A.     

    Our clients were involved in furniture retailing and furniture transport for many decades and contacted us to re-upholster their Timberline ‘Captain’s Chairs’. These were a very popular occasional chair from the late 70’s and early 80’s not just in residential sales but they were also used in commercial hospitality applications.

    The chairs were originally upholstered in a Nylex ‘Deerhide’ vinyl which was a quality product in its days so we advised using a vinyl from the Austex ‘Studio’ as a quality replacement. The existing upholstery was completely removed, then the show-wood frames cleaned and polished. New high density foam was laminated onto the padded areas and the chairs were upholstered to the original finish with piped and space studded detail.

    Our clients re-upholstered ‘Captain’s Chairs’ looked in place around their bar with complimentary comments passed over a few drinks.

    Call us Today