Re-upholstery of a Jason Recliner Chair

By Frank Parker

reupholster Jason recliner Perth
reupholster Jason recliner Perth

Transforming the Classic Jason Recliner

Jason recliner chairs are an iconic piece of Australian furniture valued for their quality craftsmanship and durability, making them sought after to this day. This restoration aimed to preserve the chair’s structure for future generations to come.

The Origin of Jason Recliners

Jason chairs were manufactured under license from Lazy Boy in Munro Michigan. The factory operated in Welshpool WA from the mid 1960s through to about 1990. These chairs were known for featuring a very robust and unique mechanism. The business was owned and managed by the Bridge family with the chairs distributed around Australia and at its peak they were also exported.

This is Our Restoration Process

  • The chair was completely stripped and the mechanism cleaned and lubricated
  • The show-wood rocker base and the turned wing sections were sanded and re-lacquered dark walnut
  • The back zig zag springs were linked
  • New hessian was layered over the seat springs
  • New high density padding was laminated onto the body
  • New polyester encased premium cushioning was fabricated and
  • The chair was then re-upholstered to the same finish in an English Heritage Linen
This chair was also of sentimental value as it previously belonged to our client’s father. We wish her many years of memorable moments in this special chair.
Call us Today to Find Out About Restoring Your Chair

Similar Posts

  • Restoration of Club Lounge

    ByFrank Parker
    Reupholster Club Lounge Perth

    What we generally recognise as Australian styled ‘club lounges’ were made from the late 1920’s through to the mid 1950’s. This design was not uniquely Australian however it was very popular in Australia during this era and the suite featured is typical of this period however many variations were available.

    These lounge suites all featured the wide arms, usually with timber trays and bases but some also had decorative timber trim on the arm facings. The upholstery finishes were also available in a wide variation of finishes. This included cord trim, contrast piping and raised panel patterns on the inside backs.

    A client approached us who is from a prominent furniture manufacturing family to restore their ‘club lounge’. This club lounge was not a family heirloom but a design from the era they had always found interesting and destined for their retirement home. It is always an honour to be asked by a contemporary to restore a favourite piece of furniture however the expectations are always as equally high.

    We stripped the 3 seater and 2 chairs down to the bare frames, removed the show-wood components then screwed the joints together. The timber arm trays were so badly damaged leaving us with no option than to completely replace them however the front base strips were sanded back and re-used have receiver three coats of lacquer.

    The bases and backs were re-webbed with jute webbing then the coil springs laced in, tied down and covered with heavy weight hessian. We then used synthetic ‘thumb roll’ to build up the edges and laminated layers of premium foam over the bases, arms and inside backs until the desired shapes were achieved. Flutes were sewn into the inside back covers and the suite was trimmed with contrast piping. The seat cushion inserts were fabricated by laminating various densities of premium foam then encasing them with bonded polyester fibre. The outside arms and outside backs were all lined padded providing a superior finish.

    The result was that we had brought furniture made about 80 years ago back to life. We trust the new owners will receive many years of enjoyable use of their furniture. However from a trade persons perspective we often wonder, what would those who originally made the furniture think of it now?

    Call us Today

  • Reupholster Argyle Furniture

    ByFrank Parker

    Argyle Furniture Designs was founded by Frank Parker in 1982 and was a trading name of F.R Parker Furniture which commenced operations in Perth during the mid-1970s. Prior to this F.R. Parker & Co. commenced in 1964 operating as manufacturers’ agents in WA representing both WA and Eastern States furniture manufacturers.

    Argyle Furniture Designs manufactured a range of mainly Australian colonial styled furniture. The signature of their designs were solid well-constructed Jarrah frames featuring the Pullmaflex springing system.  Argyle Furniture Designs was sold to Karl Bloomfield of Living Choice Upholstery in 2006.

    A client contacted us having purchased an Argyle Furniture Designs lounge suite in 1989. It had received constant use over the years in their lounge room and they wanted the furniture re-upholstered. It had been originally upholstered in a high quality synthetic suede.

    We completely removed all existing upholstery and cleaned the Jarrah show-wood legs. The Pullmaflex springing system remained in excellent condition and the cushioning although originally high quality required replacing. The body padding was replaced and we fabricated new polyester encased premium seat and back cushion inserts.

    The lounge suite was upholstered in an Australian made plain chenille and upholstered to original condition. Our clients were elated with the finished result and we trust they have many years of enjoyment  using their re-upholstered lounge suite.

    Call us Today

  • Refurbish Moran chairs

    ByFrank Parker

    Our Clients’ Favourite Two Moran Chairs

    A local Perth client approached us who had acquired quality pieces of furniture during the 1960’s and 70’s but was having to downsize and could only take her favourite two Moran chairs purchased new in 1972.

    The Moran Furniture Story

    The Moran story started with John Moran completing his upholstery apprenticeship then starting John Moran Furniture in 1950 at his mother’s garage then shifting to a rented factory. Moran Furniture grew over the decades providing furniture for several generations of Australians.

    The Steps for Repairing These Chairs

    These Moran chairs were worthy of complete reupholstery as the frames were sturdy and the sprung edge was in good condition. The original upholstery was stripped to the frame and the rejuvenation process began by doing the following:

    • new jute webbing
    • hessian
    • high density foam overlays
    • polyester encased premium cushion inserts

    The result is these two luxurious chairs are in new condition ready for many more years of enjoyment.

    The Moran Five Points of Difference

    Moran Furniture was always marketed with the “5 Points of Difference”

    1. Genuine 8 way hand tied springs
    2. Spring cell seat cushions
    3. Body correct lumbar support
    4. Kiln dried, close grain hardwood timber
    5. Premium leathers & fabrics

    Our customer was thrilled with their Moran Furniture repairs.

    Call us Today to Have Your Moran Furniture Repaired

  • Co-ordinating classic chairs

    ByFrank Parker

    Timberline Furniture commenced operations in Perth WA with the factory being located in Willetton. The furniture manufacturing business was founded by Ron Jones and Hedley Van Der Straaten in the early 70’s and ran through to the mid 90’s with about 10 – 12 staff. Ron was a Wood-Turner by trade and managed operations with Hedley managing sales and general business. Timberline predominantly manufactured dining furniture but also made some lounge and occasional furniture. During the 80’s they entered into a collaborative venture with co-ordinated designs, Trustyle Furniture making the lounge suites, George’s Cabinets making the cabinetry and Timberline the dining suites. These co-ordinated furniture ranges were sold by furniture retailers throughout W.A.     

    Our clients were involved in furniture retailing and furniture transport for many decades and contacted us to re-upholster their Timberline ‘Captain’s Chairs’. These were a very popular occasional chair from the late 70’s and early 80’s not just in residential sales but they were also used in commercial hospitality applications.

    The chairs were originally upholstered in a Nylex ‘Deerhide’ vinyl which was a quality product in its days so we advised using a vinyl from the Austex ‘Studio’ as a quality replacement. The existing upholstery was completely removed, then the show-wood frames cleaned and polished. New high density foam was laminated onto the padded areas and the chairs were upholstered to the original finish with piped and space studded detail.

    Our clients re-upholstered ‘Captain’s Chairs’ looked in place around their bar with complimentary comments passed over a few drinks.

    Call us Today

  • Sentimental Furniture For Years

    ByFrank Parker
    Restoring Sentimental Furniture in Perth

    Passing Down Furniture or Inheriting Furniture

    It is always difficult to place a monetary value on something that is of high sentimental value however when the furniture has been restored the value is evident. Furniture that is of high sentimental value is usually inherited but may also have been from an era of perceived sentimental interest or have been previously possessed by an individual of interest. However regardless of the reason a high proportion of furniture we restore is due to sentimental value.

    Reupholstering Library Chairs From the 1920’s

    Our client approached us wanting to rejuvenate two library chairs with a matching chaise initially purchased new by his wife’s grandparents in the 1920’s being made in Australia. When we inspected this furniture it was in a completely dilapidated condition due to years of storage in a damp basement.

    How We Renewed the Library Chairs

    • We completely striped the upholstery to the frame noting that it had also been re-upholstered shabbily
    • It was not until we had completely stripped the existing upholstery that we became aware that some of the carved timber rails were rotten due to prolonged storage in damp conditions
    • We approached the client with this information as restoration was going to be a major task.

    A Collaborative Restoration

    Our client still insisted the furniture be restored and this was now going to be a collaborative operation. Our friend from Eachells Fine Furniture was engaged to replace the rotten carved timber rails. He ascertained the species of Eastern States Eucalypt used in construction so replacements would look identical. The resurrected timber frames were then polished looking like original.

    Our client still insisted the furniture be restored and this was now going to be a collaborative operation. Our friend from Eachells Fine Furniture was engaged to replace the rotten carved timber rails. He ascertained the species of Eastern States Eucalypt used in construction so replacements would look identical. The resurrected timber frames were then polished looking like original.

    We then set about the task of re-upholstering this furniture using original methods and materials. They were webbed with heavy weight jute webbing then coiled springs were laced in, tied down then hessian overlays. We then however use laminated layers of premium padding encased in polyester. The result is fundamentally original methods but finishing with some new materials to enhance the comfort.

    This furniture was upholstered to original finish and trimmed with a matching gimp. Our clients were ecstatic with tears of sentiment!

    Call us Today to Have Your Sentimental Furniture Restored For Future Generations

  • Ramada Furniture – Reupholster

    ByFrank Parker

    Ramada Furniture commenced operations in the mid 1980’s and was owned by Graham and Justin Davies. Graham also owned Leather House a successful furniture retail business specialising in the sale of leather lounge furniture. His son Justine operated the factory in Canning Vale which took over a large purpose built factory from another lounge furniture manufacturer Stylecraft which had ceased operations.

    Grahame Davies sold Leather House in the early 2000’s and Ramada Furniture was subsequently sold to Lawrence Barnard. Lawrence also owned Featureline which locally manufactured more budget priced lounge furniture. He then operated the combined businesses wholesaling lounge furniture to the WA retail trade.  However due a changing market and the onslaught of inferior but cheaper imported lounge furniture the combined business failed after about 3 years.

    A couple approached us who were renovating their home which required updating their furniture. They were however mindful regarding waste and wanted to up-cycle as much as possible. They had purchased Ramada two leather lounge chairs and a footstool about thirty years ago which were looking seriously dated and if possible wanted them rejuvenated in fabric.

    We completely removed the existing upholstery from the two chairs and footstool then started the re-upholstery process fitting new heavy grade elastic webbing. High density foam was then laminated to the frame bodies and new polyester encased premium foam cushion inserts were fabricated. The lounge furniture was then carefully re-upholstered to original finish except the seat cushions were now reversible.

    Our clients were absolutely delighted with the result of their up-cycling. The chairs and footstool have again taken pride of place in their renovated upstairs sitting area.

    Call us Today