Re-upholster Antique Chairs

By Frank Parker

Occasionally we receive antique chairs which are basically well preserved but they have been previously shabbily re-upholstered or upholstered out of context with the era. This rarely does the furniture justice and usually results in complete restoration.

Our client came to us with a lounge chair made in the 1890’s having been originally purchased by her deceased husband’s grandparents. She was honest in explaining that under her instructions the chair had been re-upholstered in the early 1980’s in a pastel cotton and the style modernised to match their décor at a previous residence. She was now ashamed of her previous decision and wanted the chair re-upholstered to its previous glory.

The chair’s design had been modernised by having a loose seat cushion fitted and absence of piped detail. We removed all the upholstery stripping the chair down to the bare frame and the turned timber legs were then cleaned and polished. Heavy weight jute webbing was then fitted to the seat and back, the coil springs laced, tied down then hessian overlays fitted. We used synthetic ‘thumb roll’ on the seat front, arms and back scrolls then laminated premium polyurethane foams finished with polyester overlays. The seat cushion inner was fabricated from high resilience foam and encased with bonded polyester fibre.

The chair was then upholstered using a fabric selected by our client which suited the chair and was basically in keeping with the period. The result was a chair which was modernised to a degree under the cover for comfort however retained much authenticity with the upholstery finish and piped detail. Our client was over joyed with her chair and no doubt will become a family heirloom.

Similar Posts

  • Custom Upholstery

    This custom-made dining lounge was designed and manufactured by a cabinet making firm then upholstered by a local upholstery business. The frame was well designed and constructed however there were continual substantial issues with the upholstery. Unfortunately this is something that occurs to often in our industry. 

    A client approached us saying she had a custom-made dining lounge and there were substantial issues with the upholstery and she had given up trying to negotiate any solution with this upholstery business. The entire front edge of the seat had collapsed and buttons which she did not want but were initiated by the upholstery firm had ‘popped’. Our client engaged us to completely re-upholster this dining lounge.

    We completely removed the existing upholstery and discovered the problems causing the clients concerns. The previous upholsterers had used high quality foam on the seat however they had used a water based contact adhesive to which there are still major application problems and is was simply just not effective. Also the reason they had to place buttons into the seat and back panels was that the patterns were not true to the frame sizes causing the cushions to distort.

    We started from scratch making templates true to the frame then fabricated premium cushioning and laminated it with bonded polyester fibre. The cushion covers were then carefully marked with sewing indicators and sewn to shape as such large panels can either be stretched or gathered. The lounge was then upholstered with minimal effort as the fabric covers fitted perfectly.

    The result was that our client was absolutely overwhelmed with the result and we have since received repeat work from her. This just goes to show that quality work is always the best form of advertising and everyone is a winner.

    Call us Today
  • Ramada Furniture – Reupholster

    Ramada Furniture commenced operations in the mid 1980’s and was owned by Graham and Justin Davies. Graham also owned Leather House a successful furniture retail business specialising in the sale of leather lounge furniture. His son Justine operated the factory in Canning Vale which took over a large purpose built factory from another lounge furniture manufacturer Stylecraft which had ceased operations.

    Grahame Davies sold Leather House in the early 2000’s and Ramada Furniture was subsequently sold to Lawrence Barnard. Lawrence also owned Featureline which locally manufactured more budget priced lounge furniture. He then operated the combined businesses wholesaling lounge furniture to the WA retail trade.  However due a changing market and the onslaught of inferior but cheaper imported lounge furniture the combined business failed after about 3 years.

    A couple approached us who were renovating their home which required updating their furniture. They were however mindful regarding waste and wanted to up-cycle as much as possible. They had purchased Ramada two leather lounge chairs and a footstool about thirty years ago which were looking seriously dated and if possible wanted them rejuvenated in fabric.

    We completely removed the existing upholstery from the two chairs and footstool then started the re-upholstery process fitting new heavy grade elastic webbing. High density foam was then laminated to the frame bodies and new polyester encased premium foam cushion inserts were fabricated. The lounge furniture was then carefully re-upholstered to original finish except the seat cushions were now reversible.

    Our clients were absolutely delighted with the result of their up-cycling. The chairs and footstool have again taken pride of place in their renovated upstairs sitting area.

    Call us Today
  • Our Refurbishing of T.H Brown chairs

    TH Brown Chairs Reupholstered Perth

    The History of Thomas Howard Brown

    Thomas Howard Brown formed T.H Brown during 1911 in Adelaide. The brand became a household name in furniture during the first half of the 20th century being one of Australia’s largest furniture manufacturers by the 1920’s and producing its two millionth chair by the 1940’s.

    Thomas’s son Peter joined the business after his return from WWII and went on to develop some of T.H. Brown’s most iconic pieces of furniture. Peter and his brother Napier ran the business until 1987 when T.H. Brown was sold to Work Space Commercial Furniture.

    Thomas’s grandson Simon joined the business in 2015 and formed a joint operation to re-launch some of T.H. Brown’s mid-century signature pieces.

    Our Client’s TH Brown Chairs

    Our client has a classic mid-century home and wished to furnish it appropriately. She had acquired a substantial range of pre-loved furniture from this era over several years and we were fortunate in been given the task of restoring these pieces.

    The Reupholstery Process We Undertook

    One of our tasks was to restore a set of six T.H. Brown dining chairs.

    • We carefully stripped these chairs down
    • Due to the quality of construction few repairs were required
    • The chairs were then carefully sanded back
    • Three coats of clear lacquer were applied being sanded back between coats
    • The frames were then gently rubbed back with super fine steel wool to enhance the matt finish required
    • We then laminated the seat ply panel with high density premium padding and
    • Upholstered the seat with a classic mid-century textured velvet.

    This beautiful mid-century furniture was completely rejuvenated to its bygone glory days and our client is now living out her dream.

    Call us Today to Have Your Dining Chairs Reupholstered
  • Restoration of Club Lounge

    Reupholster Club Lounge Perth

    What we generally recognise as Australian styled ‘club lounges’ were made from the late 1920’s through to the mid 1950’s. This design was not uniquely Australian however it was very popular in Australia during this era and the suite featured is typical of this period however many variations were available.

    These lounge suites all featured the wide arms, usually with timber trays and bases but some also had decorative timber trim on the arm facings. The upholstery finishes were also available in a wide variation of finishes. This included cord trim, contrast piping and raised panel patterns on the inside backs.

    A client approached us who is from a prominent furniture manufacturing family to restore their ‘club lounge’. This club lounge was not a family heirloom but a design from the era they had always found interesting and destined for their retirement home. It is always an honour to be asked by a contemporary to restore a favourite piece of furniture however the expectations are always as equally high.

    We stripped the 3 seater and 2 chairs down to the bare frames, removed the show-wood components then screwed the joints together. The timber arm trays were so badly damaged leaving us with no option than to completely replace them however the front base strips were sanded back and re-used have receiver three coats of lacquer.

    The bases and backs were re-webbed with jute webbing then the coil springs laced in, tied down and covered with heavy weight hessian. We then used synthetic ‘thumb roll’ to build up the edges and laminated layers of premium foam over the bases, arms and inside backs until the desired shapes were achieved. Flutes were sewn into the inside back covers and the suite was trimmed with contrast piping. The seat cushion inserts were fabricated by laminating various densities of premium foam then encasing them with bonded polyester fibre. The outside arms and outside backs were all lined padded providing a superior finish.

    The result was that we had brought furniture made about 80 years ago back to life. We trust the new owners will receive many years of enjoyable use of their furniture. However from a trade persons perspective we often wonder, what would those who originally made the furniture think of it now?

    Call us Today
  • Laminated Polyurethane Fabrics

    fix faux leather peeling

    If this was your chair, you may be be thinking where can I get my chair reupholstered? Would you believe that this chair is only two years old and looks like it has been in a war zone. It is well constructed however unfortunately it was covered in a polyurethane fabric which has been affected by hydrolysis. This is when body oils and perspiration leach between the top polyurethane film and the backing fabric resulting in delamination.

    This has been a continual problem for many decades with laminated polyurethane fabrics. The manufacturer, import wholesaler and retailer could only be labelled as blissfully ignorant if they were unaware of this issue.

    We recommended to our client to reupholster this chair in the most durable upholstery fabric. For this we chose a commercial grade synthetic suede which will last for many years. It cost the client approximately 60% of the initial purchase price. This highlights the necessity for retail staff to be adequately trained and the necessary enforcement of consumer law. In this case as with so many, the client was left holding the baby while the supply chain were left holding the profits.

    We can help you with your well worn chair to ensure that you get the best wearing upholstery fabric. So that you are enjoying your furniture for many years to come.

    We Can Help You Restore Your Furniture – Just Call us Today!
  • Mid-Century Danish Chairs featuring the EK Easy Chair

    The ‘EK Easy Chair’ typifies the Danish chairs during the boom period of the 1950’s and 1960’s. This chair was designed by Illum Wikkelso who belongs to the group of famous “mid-century” Danish furniture designers.  

    The chair was manufactured by Niels Eilersen who commenced business in 1895 originally as a wheelwright and coach builder, then motor body-builder and entering into the furniture industry in the mid 1930’s. Niels Eilersen developed the technique of steam bending wood and ply which proved invaluable after the war with the production of bent-wood and spindle styled chairs. During the 50’s and 60’s the company progressed into manufacturing world class furniture and employing famous designers such as Illum Wikkelso to produce the EK Easy Chair.

    We were contacted by a client saying she has two Danish chairs requiring re-upholstering in leather. When arriving at their residence and viewing the chairs we knew they were special having an unimproved value of over $5000 per chair. Our clients specified that they wanted new elastic seat webbing, the sprung cushion inserts replaced with foam/polyester inserts and the cushion covers to be leather.

    We replaced the elastic seat webbing with firm high quality webbing which had previously be replaced by average quality webbing. We then fabricated laminated foam seat cushion inserts with a very firm high density centre core featuring high density softer overlays then encased with bonded polyester fibre. The back cushion inserts were fabricated from the slightly softer grade used in the seat overlays then also encased with bonded polyester fibre. The leather cushion covers were fabricated from a high quality semi-aniline leather being Tasman Tanning “Matisse Black”. The original leather cushions were vandyked however we sewed shaped patches allowing for the fullness created by the buttoning.

    The result was spectacular as the chairs still retained their authentic look but we had fulfilled our client’s wishes by also having the chairs more comfortable for sitting. We also gave the clients back the original sprung cushions for re-sale value if ever required. Two classic chairs now sixty years old and good for another sixty years!

    •   We Were So Happy

      We were so happy with the two black leather chairs you re-upholstered for us.
      Monique
      Shenton Park, WA
    Call us Today